FUNCTION OF MAIN COMPONENTS
| Item | Function | |
|---|---|---|
|
*1: Gasoline models *2: HV models *3: Models with headup display |
||
| Millimeter Wave Radar Sensor Assembly | ·
Radiates millimeter waves and uses the reflected waves to detect objects in front of the vehicle as well as their direction and relative velocity. ·
Performs pre-collision control based on the vehicle information and detection information from the forward recognition camera. ·
Outputs a pre-collision brake assist request signal or pre-collision brake request signal to the skid control ECU when the system determines that the possibility of collision is high. |
|
| Forward Recognition Camera | ·
Detects vehicles, pedestrians and cyclists in front of the vehicle. ·
Operates the forward recognition hood with heater sub-assembly when the outside temperature is low. |
|
| Forward Recognition Hood with Heater Sub-assembly | Control is performed by the forward recognition camera to supply electric current and heat the heater, preventing the windshield glass in front of the forward recognition camera from fogging up. | |
| Steering Sensor | Detects the angle and direction of steering and transmits a signal to the millimeter wave radar sensor assembly. | |
| Airbag Sensor Assembly | Detects the yaw rate and lateral/longitudinal deceleration of the vehicle and transmits the signal to the millimeter wave radar sensor assembly. | |
| Speed Sensors | Detect the wheel speed of each of the 4 wheels and transmits the signal to the skid control ECU. | |
| Stop Light Switch Assembly | ·
Receives a stop light turn on request signal from the skid control ECU, and turns on the stop lights. ·
Detects if the brake pedal is depressed and transmits a signal to the skid control ECU. |
|
| Steering Pad Switch Assembly | Switch the display of multi-information display within combination meter assembly. | |
| ECM*1 | ·
Detects the shift position signal and accelerator pedal opening angle and sends that information to the millimeter wave radar sensor assembly. ·
Performs engine output control based on information from the millimeter wave radar sensor assembly. |
|
| Hybrid Vehicle Control ECU*2 | ·
Detects the shift position signal and accelerator pedal opening angle and sends that information to the millimeter wave radar sensor assembly. ·
Performs hybrid system output control based on information from the millimeter wave radar sensor assembly. |
|
| Main Body ECU (Multiplex Network Body ECU) | Outputs the specification signal of the vehicle to millimeter wave radar sensor assembly. | |
| Brake Actuator Assembly*1 | Skid Control ECU | ·
Receives a brake assist standby request signal from the millimeter wave radar sensor assembly and switches the brake assist to standby mode. When a master cylinder pressure signal is input, it activates the brake assist. ·
Receives a pre-collision brake request signal from the millimeter wave radar sensor assembly, and then applies the brakes. ·
Transmits vehicle speed signals to the millimeter wave radar sensor assembly. |
| Brake Booster with Master Cylinder Assembly*2 | ||
| Combination Meter Assembly | Multi-information Display | ·
Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the millimeter wave radar sensor assembly. ·
Disables the pre-collision system operation when selected PCS OFF mode in setting display function. ·
Changing the pre-collision warning timing when selected Early/Middle/Late in setting display function. |
| PCS Warning Light | ·
Illuminates when the pre-collision system is disabled or VSC is turned off. ·
Illuminates when the pre-collision system is disabled or malfunctioning to warn the driver that the pre-collision system will not operate. |
|
| VSC OFF Indicator Light | Illuminates when the VSC is not available. | |
| Buzzer | Sounds to warn the driver in accordance with signals from the millimeter wave radar sensor assembly. | |
| Meter Mirror Sub-assembly*3 | Shows a warning message to warn the driver on the headup display. | |
| Combination Switch Assembly | VSC OFF Switch | Disables the pre-collision brake and pre-collision brake assist operation when VSC OFF mode. |
| Central Gateway ECU (Network Gateway ECU) | Transmits the signal between the CAN communication bus. | |
FUNCTION
Pre-collision warning
When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi-information display to urge the driver to take evasive action.
Pre-collision brake assist
When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed.
Pre-collision braking
If the system determines that the possibility of a frontal collision is extremely high, the brakes are automatically applied to help avoid the collision or reduce the impact of the collision.
Intersection right/left turn assistance
If the system determines that there is a high possibility of a collision in the following situations, it will assist with a pre-collision warning and, if necessary pre-collision braking. Depending on the configuration of the intersection, it may not be possible to support.
When you turn right/left at an intersection and cross the path of an oncoming vehicle.
When you turn right/left, pedestrian is detected in the forward direction and estimated to enter your vehicle's path. (Bicycle riders are not detected.)
OPERATING CONDITION
Operational conditions
The pre-collision system is enabled and the system determines that the possibility of a frontal collision with a detected object is high. The system may not operate in the following situations:
If an auxiliary battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time.
If the shift lever is in R.
When the VSC OFF indicator is illuminated (only the pre-collision warning function will be operational).
Each function is operational at the following speed:
| Detectable objects | Vehicle speed | Relative speed between your vehicle and object |
|---|---|---|
| Vehicles | Approximately 10 to 180 km/h (7 to 110 mph) | Approximately 10 to 180 km/h (7 to 110 mph) |
| Bicyclists and pedestrians* | Approximately 10 to 80 km/h (7 to 50 mph) | Approximately 10 to 80 km/h (7 to 50 mph) |
| Detectable objects | Vehicle speed | Relative speed between your vehicle and object |
|---|---|---|
| Vehicles | Approximately 30 to 180 km/h (20 to 110 mph) | Approximately 30 to 180 km/h (20 to 110 mph) |
| Bicyclists and pedestrians* | Approximately 30 to 80 km/h (20 to 50 mph) | Approximately 30 to 80 km/h (20 to 50 mph) |
| Detectable objects | Vehicle speed | Relative speed between your vehicle and object |
|---|---|---|
| Vehicles | Approximately 10 to 180 km/h (7 to 110 mph) | Approximately 10 to 180 km/h (7 to 110 mph) |
| Bicyclists and pedestrians* | Approximately 10 to 80 km/h (7 to 50 mph) | Approximately 10 to 80 km/h (7 to 50 mph) |
Intersection right/left turn assistance (pre-collision warning)
When the turn signal is not operating, support for turning left or right at an intersection which targets oncoming vehicles does not work.
| Detectable objects | Vehicle speed | Oncoming vehicle speed | Relative speed between your vehicle and object |
|---|---|---|---|
| Vehicles | Approximately 10 to 25 km/h (7 to 15 mph) | Approximately 30 to 55 km/h (20 to 35 mph) | Approximately 40 to 80 km/h (25 to 50 mph) |
| Pedestrians* | Approximately 10 to 25 km/h (7 to 15 mph) | - | Approximately 10 to 25 km/h (7 to 15 mph) |
Intersection right/left turn assistance (pre-collision braking)
When the turn signal is not operating, support for turning left or right at an intersection which targets oncoming vehicles does not work.
| Detectable objects | Vehicle speed | Oncoming vehicle speed | Relative speed between your vehicle and object |
|---|---|---|---|
| Vehicles | Approximately 15 to 25 km/h (10 to 15 mph) | Approximately 30 to 45 km/h (20 to 28 mph) | Approximately 45 to 70 km/h (28 to 43 mph) |
| Pedestrians* | Approximately 10 to 25 km/h (7 to 15 mph) | - | Approximately 10 to 25 km/h (7 to 15 mph) |
*: Applicable to vehicles designed for regions that detection of pedestrians and/or bicyclists is possible.
Object detection function
The system detects objects based on their size, profile, motion, etc. However, an object may not be detected depending on the surrounding brightness and the motion, posture, and angle of the detected object, preventing the system from operating properly. The illustration shows an image of detectable objects.
Cancelation of the pre-collision braking
If either of the following occur while the pre-collision braking function is operating, it will be canceled:
The accelerator pedal is depressed strongly.
The steering wheel is turned sharply or abruptly.
Conditions under which the system may operate even if there is no possibility of a collision.
In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
When passing a detectable object, etc.
When changing lanes while overtaking a detectable object, etc.
When approaching a detectable object in an adjacent lane or on the roadside, such as when changing the course of travel or driving on a winding road.
When rapidly closing on a detectable object, etc.
When approaching objects on the roadside, such as detectable objects, guardrails, utility poles, trees, or walls.
When there is a detectable object or other object by the roadside at the entrance of a curve.
When there are patterns or paint in front of your vehicle that may be mistaken for a detectable object.
When the front of your vehicle is hit by water, snow, dust, etc.
When overtaking a detectable object that is changing lanes or making a right/left turn.
When passing a detectable object in an oncoming lane that is stopped to make a right/left turn.
When a detectable object approaches very close and then stops before entering the path of your vehicle.
If the front of your vehicle is raised or lowered, such as when on an uneven or undulating road surface.
When driving on a road surrounded by a structure, such as in a tunnel or on an iron bridge.
When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion in front of your vehicle.
When passing under an object (road sign, billboard, etc.).
When approaching an electric toll gate barrier, parking area barrier, or other barrier that opens and closes.
When using an automatic car wash.
When driving through or under objects that may contact your vehicle, such as thick grass, tree branches, or a banner.
When driving through steam or smoke.
When driving near an object that reflects radio waves, such as a large truck or guardrail.
When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present.
While making a right turn, when an oncoming vehicle has already exited the path of your vehicle.
While making a right turn, closely in front of an oncoming vehicle.
While making a right turn, when an oncoming vehicle stops before entering the path of your vehicle.
While making a right turn, when an oncoming vehicle turns right/left in front of your vehicle.
While steering into the direction of oncoming traffic.
While making a right/left turn, when a crossing pedestrian stops before entering the path of your vehicle.
While making a right/left turn, when a crossing pedestrian has already exited the path of your vehicle.
While making a right/left turn, closely in front of crossing pedestrian.
Situations in which the system may not operate properly
In some situations such as the following, an object may not be detected by the radar sensor and front camera, preventing the system from operating properly:
When a detectable object is approaching your vehicle.
When your vehicle or a detectable object is wobbling.
If a detectable object makes an abrupt maneuver (such as sudden swerving, acceleration or deceleration).
When your vehicle approaches a detectable object rapidly.
When a detectable object is not directly in front of your vehicle.
When a detectable object is near a wall, fence, guardrail, manhole cover, vehicle, steel plate on the road, etc.
When a detectable object is under a structure.
When part of a detectable object is hidden by an object, such as large baggage, an umbrella, or guardrail.
When multiple detectable objects are close together.
If the sun or other light is shining directly on a detectable object.
When a detectable object is a shade of white and looks extremely bright.
When a detectable object appears to be nearly the same color or brightness as its surroundings.
If a detectable object cuts or suddenly emerges in front of your vehicle.
When the front of your vehicle is hit by water, snow, dust, etc.
When a very bright light ahead, such as the sun or the headlights of oncoming traffic, shines directly into the front camera.
When approaching the side or front of a vehicle ahead.
If a vehicle ahead is a motorcycle.
If a vehicle ahead is narrow, such as a personal mobility vehicle.
If a preceding vehicle has a small rear end, such as an unloaded truck.
If a preceding vehicle has a low rear end, such as a low bed trailer.
If a vehicle ahead has extremely high ground clearance.
If a vehicle ahead is carrying a load which protrudes past its rear bumper.
If a vehicle ahead is irregularly shaped, such as a tractor or side car.
If a vehicle ahead is a child sized bicycle, a bicycle that is carrying a large load, a bicycle ridden by more than one person, or a uniquely shaped bicycle (bicycle with a child seat, tandem bicycle, etc.).
If a pedestrian/or the riding height of a bicyclist ahead is shorter than approximately 1 m (3.2 ft.) or taller than approximately 2 m (6.5 ft.).
If a pedestrian/bicyclist is wearing oversized clothing (a rain coat, long skirt, etc.), making their silhouette obscure.
If a pedestrian is bending forward or squatting or bicyclist is bending forward.
If a pedestrian/bicyclist is moving fast.
If a pedestrian is pushing a stroller, wheelchair, bicycle or other vehicle.
When driving in inclement weather such as heavy rain, fog, snow or a sandstorm.
When driving through steam or smoke.
When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel, making a detectable object appear to be nearly the same color as its surroundings.
When driving in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a tunnel.
After the engine (gasoline models)/hybrid system (HV models) has started the vehicle has not been driven for a certain amount of time.
While making a left/right turn and for a few seconds after making a left/right turn.
While driving on a curve and for a few seconds after driving on a curve.
If your vehicle is skidding.
If the front of the vehicle is raised or lowered.
If the wheels are misaligned.
If a wiper blade is blocking the front camera.
The vehicle is being driven at extremely high speeds.
When driving on a hill.
If the radar sensor or front camera is misaligned.
When driving in a traffic lane separated by more than 2 lanes where oncoming vehicles are driving while making a right turn.
When largely out of place with the opposite facing targeted oncoming vehicle during a right turn.
While making a right/left turn, when a pedestrian approaches from behind or side of your vehicle.
In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly:
If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet.
If the vehicle is not properly maintained (brakes or tires are excessively worn, improper tire inflation pressure, etc.).
When the vehicle is being driven on a gravel road or other slippery surface.
If VSC is disabled:
If VSC is disabled, the pre-collision brake assist and pre-collision braking functions are also disabled.
The PCS warning light will turn on and "VSC Turned OFF Pre-Collision Brake System Unavailable" will be displayed on the multi-information display.
If a warning light illuminates:
When a buzzer sounds simultaneously:
Indicates a malfunction has occurred in the PCS (Pre-Collision System).
If a buzzer does not sound:
The PCS (Pre-Collision System) has become temporarily unavailable, corrective action may be necessary.
If the PCS (Pre-Collision System) or VSC (Vehicle Stability Control) system is disabled, the PCS warning light will illuminate.
If a warning message is displayed:
If "Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature", "Front Camera Low Visibility Unavailable See Owner's Manual" or "Front Camera Unavailable See Owner's Manual" is displayed, the following systems may be suspended until the problem shown in the message is resolved.
PCS (Pre-Collision System)
LTA (Lane Tracing Assist)
Automatic High Beam
RSA (Road Sign Assist)
Dynamic Radar Cruise Control
SYSTEM CONTROL
Pre-collision Brake Assist
When the driver depresses the brake pedal after the pre-collision system has determined that there is the possibility of a collision, brake fluid pressure is increased. If the possibility of a collision is still high, brake fluid pressure is further increased.
Pre-collision Braking
When the pre-collision system determines that a collision is imminent, the system performs pre-collision braking control.
DIAGNOSIS
Initial Check
The forward recognition camera performs an initial check on the system for approximately 3 seconds after the ignition switch has been turned on (IG).
Monitor Function
After completing the initial check, the pre-collision system becomes ready to operate. During this time, the forward recognition camera periodically monitors the system for any malfunctions.
Diagnostic Trouble Code (DTC)
If the forward recognition camera detects a malfunction in the pre-collision system, it stores a 7 digit Diagnostic Trouble Code (DTC) in memory.