Home › Engine / Hybrid System › M15A-FKS (FUEL) › FUEL SYSTEM
NM36W0E _51 Engine / Hybrid System _087986 M15A-FKS FUEL _0420226 FUEL SYSTEM DE DETAILS F

M15A-FKS FUEL  FUEL SYSTEM  DETAILS  FUEL DELIVERY PIPE  


CONSTRUCTION


a.

A pressed steel fuel delivery pipe is used.


b.

A fuel pressure sensor is installed on the fuel delivery pipe.


c.

A nozzle holder clamp is provided for each area where a direct fuel injector assembly is installed. This clamp applies a constant spring force to the direct fuel injector assembly to prevent it from moving when the combustion pressure is applied to the injector while the engine is being started, during which the fuel pressure is low. As a result, the clamp increases the sealing performance of the injector, while reducing vibration and noise.


d.

Metal-to-metal surface seal connections are used for the joint areas of the fuel pressure sensor and high-pressure fuel pipes.

W144274C01
2.719,0.802 3.104,0.219 3.104,0.219 3.281,0.219 true 1.521,1.458 1.688,1.458 1.688,1.458 2.177,1.104 true 1.51,2.156 1.688,2.156 1.688,2.156 2.031,2.01 true 2.792,2.698 3,2.698 3,2.698 3.385,2.302 true 3.406,3.469 3.604,3.469 3.604,3.469 3.927,3.115 true 1.333,1.354 1.646,1.51 0.313,0.156 10 false *1 1.313,2.073 1.625,2.229 0.313,0.156 10 false *2 3.333,0.156 3.646,0.313 0.313,0.156 10 false *3 2.615,2.625 2.927,2.781 0.313,0.156 10 false *4 3.25,3.406 3.563,3.563 0.313,0.156 10 false *5
*1 High-pressure Fuel Pipe *2 Fuel Delivery Pipe
*3 Fuel Pressure Sensor *4 Nozzle Holder Clamp
*5 Fuel Injector Assembly - -