CONSTRUCTION
A resin intake manifold is used. This manifold has 4 small pieces integrated using vibration welding, achieving a lightweight design.
EGR delivery is integrated into the intake manifold and designed in a tournament arrangement. This allows EGR gas to be equally distributed to the cylinders while also achieving a reduced number of components and a lightweight design.
The blowby gas circuit has been integrated into the intake manifold to simplify the engine.
As the fuel delivery pipe has been made more compact by using a bolt with a smaller than usual head size for the fuel delivery pipe, the port diameter of the intake manifold has been enlarged to enhance its intake ability and the power output of the engine.
| *1 | Intake Manifold | *2 | Throttle Body Gasket |
| *3 | Throttle Body with Throttle Position Sensor Assembly | - | - |
| *a | EGR Delivery | *b | EGR Gas Flow |
| *c | Blowby Gas Flow | - | - |