FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Engine Water Pump Assembly (Water Inlet Housing with Water Pump Sub-assembly) | Optimizes coolant circulation based on signals from the ECM. | |
| Water Inlet with Thermostat Sub-assembly | Thermostat with Heater | Assists opening the thermostat with heater valve based on signals from the ECM. |
| Engine Coolant Temperature Sensor | Detects the engine coolant temperature. | |
| Crank Position Sensor | Detects the engine speed. | |
FUNCTION
By using the variable cooling system that consists of the thermostat with heater, engine water pump assembly (water inlet housing), engine warm-up capability has been enhanced, friction has been reduced, low fuel consumption has been achieved and output has been enhanced.
Early Warm-up
The flow rate is reduced to minimize piston slap during warm up.
| *A | Models with CVT | - | - |
| *1 | Engine | *2 | Heater Radiator Unit Sub-assembly |
| *3 | CVT Fluid Warmer (Transmission Oil Cooler) | *4 | Engine Water Pump Assembly (Water Inlet Housing with Water Pump Sub-assembly) |
| *5 | Water Inlet with Thermostat Sub-assembly
·
Thermostat with Heater |
*6 | Radiator Assembly |
| *a | EGR Cooler Assembly, etc. | - | - |
Output Enhancement
When current is not applied to the thermostat with heater, coolant flow volume is increased, enhancing output. Additionally, applying current to the thermostat with heater decreases thermostat with heater opening temperature, ensuring cooler efficiency.
| *A | Models with CVT | - | - |
| *1 | Engine | *2 | Heater Radiator Unit Sub-assembly |
| *3 | CVT Fluid Warmer (Transmission Oil Cooler) | *4 | Engine Water Pump Assembly (Water Inlet Housing with Water Pump Sub-assembly) |
| *5 | Water Inlet with Thermostat Sub-assembly
·
Thermostat with Heater |
*6 | Radiator Assembly |
| *a | EGR Cooler Assembly, etc. | - | - |