FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Mass Air Flow Meter Sub-assembly | Measures the mass of air flow, and sends signals to the ECM for EGR control. | |
| Crank Position Sensor | Detects the engine speed and performs cylinder identification. | |
| Throttle Body with Throttle Position Sensor Assembly | Throttle Position Sensor | Detects the throttle valve opening angle. |
| Throttle Control Motor | Regulates the opening of the throttle valve in accordance with the signals from the ECM. | |
| Engine Coolant Temperature Sensor | Detects the engine coolant temperature. | |
| Hybrid Vehicle Control ECU | Sends signals such as the accelerator pedal position sensor signal to the ECM. | |
| EGR Valve Assembly | Opens and closes based on signals from the ECM and controls the flow rate of the exhaust gas in the EGR bypass. | |
| EGR Cooler Assembly | The EGR cooler cools the exhaust gas to improve EGR efficiency. | |
| ECM | Based on the signals received from the sensors, the ECM determines the EGR volume in accordance with the engine operating conditions. | |
SYSTEM CONTROL
An electronically controlled EGR system is used.The EGR gas of which flow rate has been controlled according to the engine operating conditions is fed into the intake line, achieving low fuel economy.
The EGR applicable range is enlarged by cooling the EGR gas in the passage inside the cylinder head sub-assembly and using a high-efficiency EGR cooler assembly.
EGR distribution passages are used in the intake manifold to distribute the EGR gas evenly to each cylinder.