Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM › 2020.03–2020.07
NM36W0E _52 Drivetrain _088257 AXLE AND DIFFERENTIAL _0420873 AXLE SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.


ii.

Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.


iii.

The sensor rotor is integrated in the bearing inner race.


iv.

A 12-point front axle shaft nut is used and staked in order to ensure that the front axle hub sub-assembly is properly tightened. Once removed, this nut cannot be reused.

X145797C01
4.094,1.583 5.167,1.01 5.167,1.01 5.333,1.01 true 4.26,2.052 5.156,2.583 5.156,2.583 5.323,2.583 true 3.469,2.323 2.25,2.917 2.25,2.917 2.083,2.917 true 3.604,1.542 2.583,0.667 2.583,0.667 2.417,0.667 true 2.229,0.583 2.542,0.74 0.313,0.156 10 false *1 1.875,2.844 2.188,3 0.313,0.156 10 false *2 5.417,2.5 5.729,2.656 0.313,0.156 10 false *3 5.417,0.938 5.729,1.094 0.313,0.156 10 false *4
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Front Axle Shaft Nut (12-point) *4 Front Axle Hub Sub-assembly


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.





b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus enhancing excellent driving stability and braking stability.


ii.

Running torque has been reduced via low-friction type grease and seals, contributing to excellent fuel economy.


iii.

The sensor rotor is integrated in the bearing inner race.

X145798C01
3.833,2.333 4.417,2.75 4.417,2.75 4.583,2.75 true 3.167,1.604 2.667,0.75 2.667,0.75 2.5,0.75 true 2.906,2.219 2.417,2.667 2.417,2.667 2.25,2.667 true 2.292,0.677 2.604,0.833 0.313,0.156 10 false *1 2.042,2.594 2.354,2.75 0.313,0.156 10 false *2 4.667,2.667 4.979,2.823 0.313,0.156 10 false *3
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Rear Axle Hub and Bearing Assembly - -


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.