CONSTRUCTION
While also adopting an L-shaped front lower No. 1 suspension arm sub-assembly with a pressed sheet steel construction using high-tensile strength steel sheet, the lower ball joint has been changed to single piece construction, achieving lighter weight while ensuring rigidity and strength.
By optimizing the characteristics of the lower arm bush, excellent steering stability as well as superior riding quality have been achieved.
The No. 1 bush uses a longitudinal axis type without outer sleeve, while the No. 2 bush uses a vertical axis type with outer sleeve bonding. In addition, the No. 2 bush adopts an inner sleeve made of aluminum with a bulge shape, with axial holes in the rubber portion to achieve both reduced weight and optimized spring characteristics.
| *1 | No. 1 Bush | *2 | Front Lower No. 1 Suspension Arm Sub-assembly |
| *3 | No. 2 Bush | - | - |
| *a | No. 2 Bush Top View | *b | No. 2 Bush Cutaway View |
| *c | No. 1 Bush Cutaway View | *d | Axial Hole |
| *e | Bulge-shaped (Convex) Portion | - | - |