Home › Power Source / Network › M15A-FXE (BATTERY / CHARGING) › CHARGING SYSTEM
NM36W0E _57 Power Source / Network _087545 M15A-FXE BATTERY / CHARGING _0421294 CHARGING SYSTEM DE DETAILS F

M15A-FXE BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY SENSOR  


CONSTRUCTION


a.

The battery state sensor assembly is installed to the negative (-) battery terminal side of the auxiliary battery. The battery state sensor assembly calculates the current, voltage, temperature, SOC (battery charging rate) and SOH (battery deterioration level), and sends signals to the hybrid vehicle control ECU via the LIN communication.


b.

To detect the current of the auxiliary battery, a shunt resistor installed inside the battery state sensor assembly is used to convert the voltage that is generated in the shunt resistor due to the battery charge and discharge current and calculate the current.


c.

The auxiliary battery temperature is calculated from the resistance value of the thermistor built into the battery state sensor assembly.

W136333E18
0.573,3.354 2.625,3.594 2.052,0.24 10 false : LIN communication line 2.104,1.042 2.594,1.292 0.49,0.25 10 false IC Chip 4,0.542 5.396,1 1.396,0.458 10 false Hybrid Vehicle Control ECU 5.198,3.365 6.292,3.615 1.094,0.25 10 false Auxiliary Battery 1.521,2.802 3.531,3.104 2.01,0.302 10 false Battery State Sensor Assembly 1.875,2.344 2.854,2.635 0.979,0.292 10 false Shunt Resistor