OUTLINE
A K320 Continuously Variable Transaxle (CVT) is used.
A 10-speed sport sequential shiftmatic system is used.
A straight type shift lever is used.
A CVT fluid warmer (transmission oil cooler) is used in the CVT fluid cooling system.
2 discharge port oil pump system is used.
In addition to the conventional metal belt between pulleys that transmits motive force, a gear transmission mechanism similar to an MT that is used when starting off and driving at low speeds has been added.
SPECIFICATION
| Item | Specification |
|---|---|
| Torque Converter Assembly Type | 3-element, 1-step, 2-phase |
| Stall Torque Ratio | 1.79 |
| Item | Specification | |
|---|---|---|
|
*1: Models without shift paddle switch (transmission shift switch assembly) *2: Models with shift paddle switch (transmission shift switch assembly) *3: Differential included. *4: The weight shown is when the transaxle is filled with fluid. |
||
| Shift Mechanism Type | Pulley and Steel Belt | |
| Forward/Reverse Switching Mechanism | Double Pinion Type Planetary Gear | |
| Gear Ratio | Forward | 3.362 |
| Reverse | 3.120 | |
| Pulley Ratio | Forward | 2.236 to 0.447 |
| Reverse | - | |
| Final Gear Ratio | 3.781 | |
| Shift Pattern | P - R - N - D - B*1
P - R - N - D - M*2 |
|
| Fluid Capacity*3 | Liters (US qts, Imp. qts) | 8.4 (8.9, 7.4) |
| Fluid Type | Toyota Genuine CVT Fluid FE | |
| Weight (Reference)*4 | kg (lb) | 81.7 (180.1) |
| Item | Specification | ||
|---|---|---|---|
| Gear transmission mechanism | No.1 Drive Gear | No. of Teeth | 27 |
| No.1 Driven Gear | No. of Teeth | 41 | |
| No.2 Drive Gear | No. of Teeth | 28 | |
| No.2 Driven Gear | No. of Teeth | 62 | |
| Planetary Gear | Sun Gear | No. of Teeth | 39 |
| No.1 Pinion Gear | No. of Teeth | 18 | |
| No.2 Pinion Gear | No. of Teeth | 17 | |
| Ring Gear | No. of Teeth | 81 | |
| Reduction Gear | Drive Gear | No. of Teeth | 27 |
| Driven Gear | No. of Teeth | 32 | |
| Final Gear | Drive Gear Teeth | No. of Teeth | 21 |
| Driven Gear Teeth | No. of Teeth | 67 | |
| C1 | No.1 Clutch | No. of Discs | 3 |
| C2 | No.2 Clutch | No. of Discs | 4 |
| B1 | No.1 Brake | No. of Discs | 3 |
MAIN FEATURES
The K320 CVT has achieved the following characteristics through the use of the items listed below.
| Item | Fuel Economy | Power Efficiency | Driveability | Quietness | Compact and Lightweight | |
|---|---|---|---|---|---|---|
|
○: Applicable -: Not applicable *: Models with shift paddle switch (transmission shift switch assembly) |
||||||
| Flat Torus Torque Converter | ○ | ○ | - | - | ○ | |
| Synchro Engagement Gear Transmission Mechanism | ○ | ○ | ○ | ○ | - | |
| Compact Continuously Variable Transmission Mechanism | ○ | - | ○ | - | ○ | |
| Narrow Angle Belt | - | - | ○ | - | ○ | |
| Belt/Gear Transmission Switching Mechanism | ○ | ○ | ○ | - | ○ | |
| Vane Type Oil Pump | ○ | - | - | - | ○ | |
| 2 Discharge Port Oil Pump | ○ | - | - | - | - | |
| Low Viscosity CVT Fluid FE | ○ | - | - | - | - | |
| Gear Ratio Pressure Control | ○ | - | ○ | - | - | |
| Oil Pressure Controller Front Arrangement | - | - | ○ | - | ○ | |
| Valve Body Artificial Aging Treatment Added | ○ | - | - | - | - | |
| Electronic Control System | Automatic Shift Control | ○ | ○ | ○ | - | - |
| Acceleration Improvement Control | - | ○ | ○ | - | - | |
| Deceleration Improvement Control | - | - | ○ | - | - | |
| 10-speed Sport Sequential Shiftmatic* | - | - | ○ | - | - | |
| Uphill/Downhill Shift Control | - | - | ○ | - | - | |
| Engine-CVT Integrated Control | ○ | ○ | ○ | - | - | |
| Flex Lock-up Control | ○ | - | ○ | ○ | - | |
| Clutch Capacity Control | ○ | - | - | - | ○ | |