Home › Drivetrain › K320 (MULTIDRIVE / CVT) › CVT SYSTEM
NM36W0E _52 Drivetrain _087616 K320 MULTIDRIVE / CVT _0421304 CVT SYSTEM DE DETAILS F

K320 MULTIDRIVE / CVT  CVT SYSTEM  DETAILS  GEAR TRAIN  


CONSTRUCTION


a.

Gear Type Power Transmission Mechanism

i.

Gear type power transmission is used when the vehicle starts off, is being driven at low speeds or is reversing.


ii.

The synchronizer mechanism engages/disengages the No. 1 driven gear and No. 2 drive gear.


iii.

The pressure servo controls the No. 1 gear shift fork shaft and synchronizer mechanism by controlling the oil pressure.


iv.

By using efficient gear type power transmission, direct and smooth start-off has been realized.


v.

When using the belt type power transmission mechanism, the gear type power transmission mechanism is disconnected by the synchronizer mechanism to reduce gear losses.


vi.

Engagement and release of the synchronizer mechanism is automatically controlled by using the stroke sensor to detect the position of the No. 1 gear shift fork shaft, and by using the linear solenoid valve SLG of the servo mechanism to directly control the No. 1 gear shift fork shaft.

X146262C02
0.948,1.552 0.948,1.208 true 0.969,2.344 1.354,1.854 true 1.583,2.948 2.219,2.948 true 2.167,3.323 2.51,2.813 true 2.25,3.583 2.531,2.969 true 2.729,3.271 3.177,3.271 true 2.656,1.01 3.104,1.01 true 2.292,1.927 3.292,1.667 true 0.844,2.344 1.188,2.646 0.344,0.302 10 false *1 2.042,3.323 2.385,3.604 0.344,0.281 10 false *3 2.146,3.583 2.51,3.927 0.365,0.344 10 false *4 3.313,1.573 3.667,1.896 0.354,0.323 10 false *6 3.135,0.938 3.51,1.25 0.375,0.313 10 false *7 0.885,1.042 1.24,1.344 0.354,0.302 10 false *a 1.688,1.323 2.063,1.646 0.375,0.323 10 false *b 2.323,1.323 2.688,1.667 0.365,0.344 10 false *c 1.438,2.875 1.792,3.177 0.354,0.302 10 false *2 3.198,3.188 3.552,3.51 0.354,0.323 10 false *5
*1 No. 1 Gear Shift Fork Shaft *2 No. 2 Drive Gear
*3 Synchronizer Ring *4 Hub Sleeve
*5 No. 1 Driven Gear *6 No. 1 Gear Shift Fork Assembly
*7 Clutch Stroke Sensor - -
*a Servo Mechanism *b Engaged (Synchronizer Mechanism)
*c Disengaged (Synchronizer Mechanism) - -




b.

Belt Type Power Transmission Mechanism

i.

The belt transmission mechanism is used in situation other than when the vehicle starts off, is being driven at low speeds or is reversing.


ii.

The belt transmission mechanism consists of a continuously variable transmission mechanism with a steel belt and a pair of pulleys. The groove width of the pulley changes according to the oil pressure to change the diameter of the steel belt, changing the pulley ratio.



c.

Forward/rearward and Gear/belt Switching Mechanism

i.

The double pinion planetary gear, C1 clutch and B1 brake situated at the input side of the belt type power transmission mechanism and the C2 clutch situated at the output side are used to switch between belt/gear power transmission and forward/reverse.

X140920C01
0.365,1.229 0.729,1.229 true 0.375,2.552 0.74,2.552 true 2.635,3.906 3,3.906 true 3.271,3.333 3.635,3.333 true 3.26,2.573 3.625,2.573 true 3.823,1.396 4.115,1.615 4.115,1.615 4.302,1.615 true 6.219,1.26 6.458,0.938 6.458,0.938 6.646,0.938 true 5.083,0.719 5.323,0.396 5.323,0.396 5.51,0.396 true 3.938,0.583 4.135,0.583 4.135,0.583 4.406,0.958 true 1.146,3.26 1.344,3.26 1.344,3.26 1.625,2.604 true 2.521,1.448 2.719,1.448 2.719,1.448 2.865,1.646 true 3.906,2.01 4.271,2.01 true 1.958,1.781 2.25,1.781 true 2,3.177 2.365,3.177 true 1.938,2.26 2.229,2.26 true 5.396,1.594 5.688,1.813 5.688,1.813 5.875,1.813 true 0.198,1.167 0.51,1.323 0.313,0.156 10 false *5 0.208,2.479 0.521,2.635 0.313,0.156 10 false *6 0.979,3.188 1.292,3.344 0.313,0.156 10 false *7 1.76,3.104 2.073,3.26 0.313,0.156 10 false *15 3.042,3.813 3.354,3.969 0.313,0.156 10 false *16 3.677,3.25 3.99,3.406 0.313,0.156 10 false *14 3.667,2.49 3.979,2.646 0.313,0.156 10 false *13 4.302,1.927 4.615,2.083 0.313,0.156 10 false *9 4.344,1.521 4.656,1.677 0.313,0.156 10 false *8 6.688,0.854 7,1.01 0.313,0.156 10 false *1 2.292,1.365 2.677,1.552 0.385,0.188 10 false *10 1.719,1.719 2.031,1.875 0.313,0.156 10 false *11 1.698,2.188 2.01,2.354 0.313,0.167 10 false *12 5.542,0.302 5.854,0.458 0.313,0.156 10 false *3 3.771,0.51 4.083,0.667 0.313,0.156 10 false *4 5.917,1.708 6.229,1.865 0.313,0.156 10 false *2
*1 Input Shaft *2 Planetary Gear Unit
*3 B1 Brake *4 C1 Clutch
*5 Primary Pulley *6 Secondary Pulley
*7 C2 Clutch *8 No. 1 Drive Gear
*9 No. 1 Driven Gear *10 Synchronizer Mechanism
*11 No. 2 Drive Gear *12 No. 2 Driven Gear
*13 Reduction Drive Gear *14 Reduction Driven Gear
*15 Differential Drive Pinion *16 Differential Ring Gear



ii.

Gear/belt Switching Mechanism

1.

By engaging/disengaging the C1 clutch and C2 clutch, the transmission is switched between belt type power transmission and gear type power transmission.

2.

Smooth switching is realized by using the linear solenoid valve SL1 and linear solenoid valve SL2 to accurately and responsively control the oil pressure of each clutch.


Torque Flow
X146263C04
2.792,2.146 3.281,1.854 true 2.208,1.219 3.198,0.979 true 2.198,1.406 1.75,0.479 true 2,1.771 1.313,0.531 true 1.938,1.833 0.948,0.813 true 1.802,1.792 0.719,1.344 true 1.99,3.667 0.563,3.667 true 3.344,2.938 2.677,3.323 true 3.188,3.313 2.531,3.49 true 3.125,3.594 2.344,3.792 true 3.271,4.969 2.375,4.969 true 4.365,1.927 3.75,1.927 true 4.396,3.406 3.958,3.406 true 4.49,3.635 4.49,4.01 true 4.99,2.771 6.448,2.594 true 3.302,1.76 3.615,2.031 0.313,0.271 10 false *1 3.229,0.896 3.563,1.167 0.333,0.271 10 false *2 1.646,0.333 2.021,0.625 0.375,0.292 10 false *3 1.188,0.396 1.521,0.646 0.333,0.25 10 false *4 0.792,0.708 1.146,0.979 0.354,0.271 10 false *5 0.563,1.26 0.885,1.521 0.323,0.26 10 false *6 0.396,3.625 0.75,3.958 0.354,0.333 10 false *7 3.354,2.833 3.729,3.146 0.375,0.313 10 false *8 3.219,3.24 3.563,3.531 0.344,0.292 10 false *9 3.156,3.521 3.448,3.771 0.292,0.25 10 false *10 3.313,4.906 3.625,5.177 0.313,0.271 10 false *11 3.51,1.885 3.875,2.188 0.365,0.302 10 false *12 4.385,4.042 4.688,4.323 0.302,0.281 10 false *14 3.719,3.354 4.125,3.74 0.406,0.385 10 false *13 1.802,5.344 2.24,5.688 0.438,0.344 10 false *a 5.448,5.333 5.896,5.677 0.448,0.344 10 false *b 6.479,2.521 6.813,2.833 0.333,0.313 10 false *15
*1 Input Shaft *2 No. 1 Drive Gear
*3 Synchromesh *4 No. 2 Drive Gear
*5 C1 Clutch *6 B1 Brake
*7 No. 2 Driven Gear *8 Reduction Drive Gear
*9 Reduction Driven Gear *10 Differential Drive Pinion
*11 Differential Ring Gear *12 Primary Pulley
*13 Secondary Pulley *14 Steel Belt
*15 C2 Clutch - -
*a Gear Type Power Transmission *b Belt Type Power Transmission



iii.

Forward/Reverse Switching Unit

1.

The forward/reverse switching unit consists of a planetary gear, a C1 clutch and a B1 brake.

2.

Smooth switching is realized by using the linear solenoid valve SL1 and linear solenoid valve SLG to accurately and responsively control the oil pressure of the clutch and brake.

3.

The C1 clutch, which operates during a forward movement, connects the input shaft with the planetary carrier.

4.

The B1 brake, which operates during reverse movement, keeps the ring gear stationary.

X146264C04
4.906,1.698 4.906,0.917 true 4.563,1.521 4.219,0.781 true 4.604,1.802 3.698,1.146 true 4.604,2.188 3.438,2.594 true 4.594,2.698 3.458,3.229 true 4.635,2.833 3.875,3.844 true 4.885,3.115 5.49,3.802 true 4.844,0.792 5.177,1.042 0.333,0.25 10 false *1 4.104,0.646 4.427,0.896 0.323,0.25 10 false *2 3.542,1.042 3.844,1.292 0.302,0.25 10 false *3 3.271,2.552 3.604,2.865 0.333,0.313 10 false *4 3.302,3.208 3.604,3.531 0.302,0.323 10 false *5 3.75,3.854 4.094,4.156 0.344,0.302 10 false *6 5.458,3.813 5.844,4.146 0.385,0.333 10 false *7 3.156,0.396 3.5,0.688 0.344,0.292 10 false *a
*1 C1 Clutch *2 B1 Brake
*3 Ring Gear *4 No. 1 Pinion
*5 Sun Gear *6 No. 2 Pinion
*7 Planetary Carrier - -
*a Forward/Reverse Switching Unit - -






OPERATION


a.

Forward/reverse Driving

i.

Forward Driving

1.

The C1 clutch is connected when advancing, and engine torque is input from the input shaft to the planetary carrier and is output to the sun gear.

X140918C01
4.656,1.458 5.323,1.458 true 4.667,2.594 5.333,2.594 true 3.448,1.385 3.729,1.385 true 3.448,2.417 3.729,2.417 true 4.635,0.552 4.906,0.323 4.906,0.323 5.104,0.323 true 4.656,2.948 5.031,3.208 5.031,3.208 5.229,3.208 true 3.844,0.323 4.021,0.323 4.021,0.323 4.292,0.708 true 4.156,2.906 3.948,3.26 3.948,3.26 3.781,3.26 true 5.135,0.24 5.448,0.396 0.313,0.156 10 false *1 3.688,0.229 4,0.385 0.313,0.156 10 false *2 3.281,1.302 3.594,1.458 0.313,0.156 10 false *3 3.625,3.188 3.938,3.344 0.313,0.156 10 false *4 5.281,3.135 5.594,3.292 0.313,0.156 10 false *5 5.365,1.375 5.677,1.531 0.313,0.156 10 false *7 6.063,1.813 6.375,1.969 0.313,0.156 10 false *a 2.833,1.823 3.146,1.979 0.313,0.156 10 false *b 3.281,2.333 3.594,2.49 0.313,0.156 10 false *3 5.375,2.5 5.688,2.656 0.313,0.156 10 false *6
*1 B1 Brake (Off) *2 Ring Gear
*3 C1 Clutch (On) *4 Planetary Carrier
*5 No. 2 Pinion *6 No. 1 Pinion
*7 Sun Gear - -
*a Input *b Output




ii.

Reverse Driving

1.

Engine torque is input to the planetary carrier when reversing. The ring gear is fixed by the B1 brake to transmit engine torque to the sun gear with inverse rotation.

X140919C01
4.688,2.594 5.323,2.594 true 4.688,1.396 5.323,1.396 true 4.667,2.948 5.021,3.198 5.021,3.198 5.188,3.198 true 3.5,2.417 3.698,2.417 true 3.5,1.396 3.698,1.396 true 4.594,0.625 4.948,0.354 4.948,0.354 5.115,0.354 true 3.875,0.385 4.021,0.385 4.021,0.385 4.302,0.708 true 3.771,3.229 3.917,3.229 3.917,3.229 4.177,2.896 true 5.177,0.26 5.49,0.417 0.313,0.156 10 false *1 3.719,0.302 4.031,0.458 0.313,0.156 10 false *2 3.333,1.313 3.646,1.469 0.313,0.156 10 false *3 3.615,3.146 3.927,3.302 0.313,0.156 10 false *4 5.219,3.094 5.531,3.25 0.313,0.156 10 false *5 5.365,2.5 5.677,2.656 0.313,0.156 10 false *6 5.375,1.313 5.688,1.469 0.313,0.156 10 false *7 6.052,1.813 6.365,1.969 0.313,0.156 10 false *a 2.854,1.823 3.167,1.979 0.313,0.156 10 false *b 3.333,2.333 3.646,2.49 0.313,0.156 10 false *3
*1 B1 Brake (On) *2 Ring Gear
*3 C1 Clutch (Off) *4 Planetary Carrier
*5 No. 2 Pinion *6 No. 1 Pinion
*7 Sun Gear - -
*a Input *b Output




iii.

Power is transmitted from the sun gear via the No. 1 drive gear to the gear type power transmission mechanism, and then from the gear type power transmission mechanism to the reduction drive gear mechanism via the No. 2 driven gear.



b.

Belt Type Power Transmission

i.

By disengaging both the C1 clutch and B1 brake, the planetary gear is disengaged and engine torque is transmitted to the belt type power transmission mechanism.


ii.

Power is transmitted from the primary pulley to the secondary pulley via the belt, and then to the reduction drive gear mechanism via the C2 clutch.