CONSTRUCTION
The widths of the grooves of the pulleys are changed through hydraulic control.
During acceleration, the operation of the linear solenoid valve SLP increases the oil pressure of the primary pulley, thus decreasing the width of the pulley groove.
During deceleration, the operation of the linear solenoid valve SLP decreases the oil pressure of the primary pulley, thus increasing the width of the pulley groove.
The secondary pulley is hydraulically controlled by the linear solenoid valve SLS. It controls the belt clamping pressure to ensure the proper power transmission efficiency.
| *1 | Primary Pulley | *2 | Steel Belt |
| *3 | Secondary Pulley | - | - |
| *a | Pulley Ratio (Low) | *b | Pulley Ratio (High) |
| *c | Groove Width (Large) | *d | Groove Width (Small) |
The primary pulley uses a single piston construction.
| *a | Pulley Ratio (Low) | *b | Pulley Ratio (High) |
| *c | Chamber | - | - |
The steel belt consists of elements and 2 rows of steel rings. In contrast to chains and belts, which transmit power through the use of tensile force, this steel belt uses the compressive action (pushing force) of the elements to transmit power.
By using gear type power transmission when the vehicle starts off or is being driven at low speeds, transmission load to the belt type power transmission mechanism is reduced which enables the use of a smaller belt, and results in a shorter, lighter transmission.
By using gear type power transmission when the vehicle starts off or is being driven at low speeds, and using belt type power transmission in the range where its efficiency is high, fuel economy is improved.
| *1 | Steel Ring | *2 | Element |
OPERATION
By disengaging the C2 clutch and engaging the C1 clutch or B1 brake, the vehicle uses gear type power transmission when starting off, is being driven at low speeds or is reversing.
By engaging the C2 clutch and disengaging the C1 clutch and B1 brake, the vehicle uses belt type power transmission in situations other than when the vehicle starts off, is being driven at low speeds or is reversing.
The changing of the pulley ratio is accomplished in a continuously variable manner by varying the widths of the grooves of the primary and secondary pulleys.
| *1 | Input Shaft | *2 | Planetary Gear Unit |
| *3 | B1 Brake | *4 | C1 Clutch |
| *5 | Primary Pulley | *6 | Secondary Pulley |
| *7 | C2 Clutch | *8 | No.1 Drive Gear |
| *9 | No.1 Driven Gear | *10 | Synchronizer Mechanism |
| *11 | No.2 Drive Gear | *12 | No.2 Driven Gear |
| *13 | Reduction Drive Gear | *14 | Reduction Driven Gear |
| *15 | Differential Drive Pinion | *16 | Differential Ring Gear |
Shift Lever in D (Starting Off and Low-speed Driving)
| *1 | Input Shaft | *2 | B1 Brake (Off) |
| *3 | C1 Clutch (On) | *4 | C2 Clutch (Off) |
| *5 | Synchronizer Mechanism (Engaged) | - | - |
Shift Lever in D (Pulley Ratio Low)
| *1 | Input Shaft | *2 | B1 Brake (Off) |
| *3 | C1 Clutch (Off) | *4 | Primary Pulley |
| *5 | Secondary Pulley | *6 | C2 Clutch (On) |
| *7 | Synchronizer Mechanism (Disengaged) | - | - |
| *a | Groove Width (Large) | *b | Groove Width (Small) |
Shift Lever in D (Pulley Ratio High)
| *1 | Input Shaft | *2 | B1 Brake (Off) |
| *3 | C1 Clutch (Off) | *4 | Primary Pulley |
| *5 | Secondary Pulley | *6 | C2 Clutch (On) |
| *7 | Synchronizer Mechanism (Disengaged) | - | - |
| *a | Groove Width (Small) | *b | Groove Width (Large) |
Shift Lever in N
| *1 | Input Shaft | *2 | B1 Brake (Off) |
| *3 | C1 Clutch (Off) | *4 | C2 Clutch (Off) |
| *5 | Synchronizer Mechanism (Engaged) | - | - |
Shift Lever in R
| *1 | Input Shaft | *2 | B1 Brake (On) |
| *3 | C1 Clutch (Off) | *4 | C2 Clutch (Off) |
| *5 | Synchronizer Mechanism (Engaged) | - | - |
Shift Lever in M (Models with Shift Paddle Switch (Transmission Shift Switch Assembly))
Gear train movement when the shift lever is in M is similar to the one when the shift lever is in D. However, since the power transmission type is changed either to the gear type or to the belt type and pulley ratio is adjusted in accordance with driver's shift operation, the driver is able to upshift or downshift with a manual-like feel.