CONSTRUCTION
A straight type shift lever that uses a transmission control cable assembly is used.
The shift control mechanism consists of a shift lock control unit assembly, a shift lever knob sub-assembly and a transmission control cable assembly.
A shift lock release button is provided inside the shift lever housing in consideration of emergency situations. A shift lever cap is provided shift lock release button to erroneous operation.
| *A | Models without Shift Paddle Switch (Transmission Shift Switch Assembly) | *B | Models with Shift Paddle Switch (Transmission Shift Switch Assembly) |
| *1 | Shift Lever Knob Sub-assembly | *2 | Shift Lever Knob Button |
| *3 | Floor Shift Shift Lever Assembly | *4 | Transmission Control Cable Assembly |
| *5 | Shift Lever Cap | - | - |
| *a | Shift Pattern | - | - |
The shift lever used is a 5-position (P, R, N, D and B*1 or P, R, N, D and M*2) straight type lever. Along with the change to a straight-type lever, a detent mechanism using knob button operation was added to prevent accidentally shifting from P→R, R→P, N→R, or D→B.
*1: Models without shift paddle switch (transmission shift switch assembly)
*2: Models with shift paddle switch (transmission shift switch assembly)
| *1 | Shift Lever Knob Sub-assembly | *2 | Shift Lever Knob Button |
| *3 | Detent Rod | *4 | Shift Lock Control Unit Assembly |
| *5 | Detent | *6 | Detent Plate |
|
Shift Lever knob button operation necessary |
|
Shift Lever knob button operation not necessary |
| *1 | Shift Lever Knob Sub-assembly | *2 | Shift Lever Knob Button |
| *3 | Detent Rod | *4 | Shift Lock Control Unit Assembly |
| *5 | Detent | *6 | Detent Plate |
|
Shift Lever knob button operation necessary |
|
Shift Lever knob button operation not necessary |