CONSTRUCTION
Front Seat Frame
A seat frame enhancing both reduced weight and excellent rigidity has been adopted.
Front Seat Cushion and Front Seatback Pad
The urethane pad thickness is optimized and the lifter rod position is moved forward, allowing for a superior fit between the front seat cushion and the bottom of the occupant.
| *1 | Front Seat Cushion Pad | *2 | Lifter Rod |
| *a | Urethane Pad Thickness Increased Below Hip Bone | *b | Urethane Pad Thickness Decreased Behind Bottom |
| *c | Lifter Rod Position Moved Forward | *d | Hip Bone |
| *e | Pelvis | - | - |
The front seatback spring position is moved backward and the bottom edge of the front seatback spring and rear edge of the front seat cushion spring are made highly rigid, achieving a driving posture that reduces driver fatigue.
| *1 | Front Seat Cushion Pad | *2 | Front Seat Cushion Spring |
| *3 | Front Seatback Spring | *4 | Front Seatback Pad |
| *a | Front Seatback Spring Moved Backward | *b | High Rigidity Front Seat Cushion Spring Rear Edge and High Rigidity Front Seatback Spring Bottom Edge |
| *c | Hip Bone (Pelvis Center of Rotation) | *d | Pelvic Angle |
Materials offering excellent seating surface stability and pressure distribution performance have been adopted, suppressing posture shift in situations such as turning left or right at an intersection.
Manual Adjuster Function
The front seat manual adjuster is provided as shown in the illustration:
| *a | Reclining Angle (52°) | *b | Sliding Width (260 mm (10.2 in.)) |
| *c | Lifter Adjustment Range (60 mm (2.36 in.)) | *d | The illustrations shown are examples only. |
Seatback Pocket
A seatback pocket is provided on the back of the front passenger seat.
| *a | Seatback Pocket | - | - |