Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2020.03–2020.07
NM36W0E _58 Vehicle Interior _088383 DOOR LOCK _0421325 POWER DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CONTROL  DOOR LOCK CONTROL  


FUNCTION


a.

The power door lock control system has the following functions:

Function*1 Outline
Manual Unlock This function unlocks all the doors when the door control switch is operated to the unlock side.
Manual Lock This function locks all the doors when the door control switch is operated to the lock side.
Key-linked Unlock This function, which is linked with the door lock key cylinder, can unlock all the doors when an unlock operation is performed.
Key-linked Lock This function, which is linked with the door lock key cylinder, can lock all the doors when a lock operation is performed.
Manual Unlock Prohibition When the doors are all closed and are locked using a key-linked lock operation, wireless door lock operation or entry lock operation, unlocking the vehicle using the door control switch is prohibited.
Key Confinement Prevention When the key is within in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*3
When the electrical key transmitter sub-assembly is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*2
Back Door Open Pressing the back door opener switch when the back door is unlocked will open the back door.
Customization The on or off setting of some functions and settings can be performed using the GTS or radio and display receiver assembly*4. In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual.

HINT:

*1: The default setting differs depending on the model.

*2: Models with smart entry and start system

*3: Models without smart entry and start system

*4: Models with navigation system




DIAGNOSIS


a.

If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.