CONSTRUCTION
This mechanism reduces the speed of the power steering motor via a worm gear and wheel gear, and transmits it to the column shaft.
The wheel gear is made of a high strength, low friction and low wear plastic material, thus achieving low noise and a lightweight construction. Also, the wheel gear internal side sleeve material was changed from steel to aluminum to reduce weight.
| *1 | Ball Bearing | *2 | Worm Gear |
| *3 | Motor Shaft | *4 | Rotor |
| *5 | Power Steering ECU | *6 | Stator |
| *7 | Column Shaft | *8 | Wheel Gear |
| *9 | Sleeve | - | - |