Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2020.03–2020.07
NM36W0E _58 Vehicle Interior _088396 METER / GAUGE / DISPLAY _0421351 METER / GAUGE SYSTEM DE DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DETAILS  COMBINATION METER  


CONSTRUCTION


a.

Multi-information Display

i.

Display Function Flow

·

The multi-information display can be switched as shown in the flow chart below:

Y231593E09
0.24,0.406 1.49,0.615 1.25,0.208 10 false Warning Display*c 1.906,1.177 3.354,1.563 1.448,0.385 10 false Suggestion/Message 4.271,0.479 4.729,0.677 0.458,0.198 10 false OFF 3.813,1.5 4.99,1.75 1.177,0.25 10 false Farewell Message 5.802,0.271 6.948,0.646 1.146,0.375 10 false Door Unlock Mode Display 2.375,2.854 3.448,3.146 1.073,0.292 10 false Opening Display 0.917,4.188 2.292,4.479 1.375,0.292 10 false Information Display*d 0.667,4.5 1.979,4.823 1.313,0.323 10 false - Fuel Economy Tab 0.667,4.854 2.115,5.281 1.448,0.427 10 false - Driving Assist System Information Tab 0.667,5.521 2.427,5.781 1.76,0.26 10 false - Audio Information Tab 0.667,5.927 2.25,6.229 1.583,0.302 10 false - Vehicle Information Tab 0.667,6.354 1.688,6.594 1.021,0.24 10 false - Settings Tab 0.667,6.76 2.24,7.094 1.573,0.333 10 false - Warning Message Tab 3.729,4.198 4.948,4.563 1.219,0.365 10 false Interruption Display 5.771,4.083 6.948,4.427 1.177,0.344 10 false Diagnosis Display 3.177,4.115 3.49,4.313 0.313,0.198 10 false *a 5.417,3.948 5.729,4.146 0.313,0.198 10 false *a 2.656,0.635 2.969,0.833 0.313,0.198 10 false *a 2.344,0.323 2.656,0.521 0.313,0.198 10 false *a 5.396,0.406 5.708,0.604 0.313,0.198 10 false *a 5.365,0.917 5.677,1.115 0.313,0.198 10 false *b 3.302,1.354 3.615,1.552 0.313,0.198 10 false *b 1.677,1.333 1.99,1.531 0.313,0.198 10 false *b 2.521,1.958 2.833,2.156 0.313,0.198 10 false *b 3.104,4.854 3.417,5.052 0.313,0.198 10 false *b 4.615,2.76 4.896,3 0.281,0.24 10 false *g 2.917,2.448 3.229,2.646 0.313,0.198 10 false *f 0.917,2.75 1.229,2.948 0.313,0.198 10 false *h 4.479,1.083 4.792,1.281 0.313,0.198 10 false *e 5.396,4.74 5.708,4.938 0.313,0.198 10 false *b

*a Conditions are not met.
*b Conditions are met.
*c If there are multiple display requests, items will be displayed in sequence.
*d Item or display is selected by operating the steering pad switch assembly.
*e ODO display is displayed for a certain period of time after the ignition switch is turned off.
*f Ignition switch off to ON.
*g Ignition switch ON to off (conditions are not met).
*h Ignition switch ON to off (conditions are met).



ii.

Display Tab Operation

·

The information currently displayed can be switched using the LEFT/RIGHT switch*1 or UP/DOWN switch*2 of the steering pad switch assembly.

HINT:

*1: Models with analog meter

*2: Models with digital meter


Y259628C01
0.313,0.875 0.625,1.031 0.313,0.156 10 false *a 2.719,0.875 3.188,1.083 0.469,0.208 10 false *b 5.125,0.875 5.615,1.073 0.49,0.198 10 false *c 5.135,3.333 5.448,3.49 0.313,0.156 10 false *d 2.75,3.333 3.063,3.49 0.313,0.156 10 false *e 0.313,3.333 0.625,3.49 0.313,0.156 10 false *f 0.24,5.5 0.458,5.75 0.219,0.25 10 false *g
*a Fuel Economy Tab *b Driving Assist System Information Tab
*c Audio Information Tab *d Vehicle Information Tab
*e Settings Tab *f Warning Message Tab
*g The illustration shown is an example only. The illustration may differ from the actual vehicle screen. - -
V100136

RIGHT switch (analog meter) or DOWN switch (digital meter) operation
V100135

LEFT switch (analog meter) or UP switch (digital meter) operation




iii.

Setting Function

·

The items displayed on the multi-information display can be customized.

·

The following items can be selected on the information setting screen.

Lane Tracing Assist System
Item Available Setting
LTA Lane Center

Center trace function can be set to on/off:

-

ON

-

OFF



Alert

Warning method can be changed:

-

Buzzer (Icon is displayed)

-

Steering Vibration (Icon is displayed)



Sensitivity

Sensitivity of alert system can be changed:

-

High (Icon is displayed)

-

Standard (Icon is displayed)



Sway Warning

Sway warning function can be set to on/off:

-

ON

-

OFF



Sway Sensitivity

Sway warning sensitivity can be selected:

-

High (Icon is displayed)

-

Standard (Icon is displayed)

-

Low (Icon is displayed)




Pre-collision System
Item Available Setting
PCS

The pre-collision system can be set to on/off:

-

ON

-

OFF



Sensitivity

Pre-collision system warning sensitivity can be selected:

-

Far (Icon is displayed)

-

Middle (Icon is displayed)

-

Near (Icon is displayed)




Blind Spot Monitor System (Models with Blind Spot Monitor System)
Item Available Setting

*: Models with rapidly approaching vehicle detection

BSM

The blind spot monitor system can be set to on/off:

-

ON

-

OFF



Brightness

Brightness of the outer rear view mirror indicator light can be changed:

-

Bright (Icon is displayed)

-

Dim (Icon is displayed)



Sensitivity*

Blind spot monitor system sensitivity can be selected:

-

Early (Icon is displayed)

-

Middle (Icon is displayed)

-

Later (Icon is displayed)

-

Only blind spots (Icon is displayed)




Toyota Parking Assist-sensor System (Models with Parking Support Brake System)
Item Available Setting
Toyota Parking Assist-sensor System

The Toyota parking assist-sensor system can be set to on/off:

-

ON

-

OFF



Volume

The volume of the warning buzzer can be selected:

-

1 (Icon is displayed)

-

2 (Icon is displayed)

-

3 (Icon is displayed)




Rear Cross Traffic Alert System (Models with Blind Spot Monitor System)
Item Available Setting
Rear Cross Traffic Alert System

The rear cross traffic alert system can be set to on/off:

-

ON

-

OFF



Volume

The volume of the warning buzzer can be selected:

-

1 (Icon is displayed)

-

2 (Icon is displayed)

-

3 (Icon is displayed)




Parking Support Brake System (Models with Parking Support Brake System)
Item Available Setting
PKSB

The parking support brake system can be set to on/off:

-

ON

-

OFF




Head-up Display (Models with Meter Mirror Sub-assembly)
Item Available Setting
HUD

The head-up display function set to on/off

-

ON

-

OFF



Brightness/Position

The brightness and position of the head-up display can be selected:

-

Bright (Graphic is displayed)

-

Dark (Graphic is displayed)

-

High

-

Low



HUD Display Customize

The contents displayed in the head-up display can be selected:

-

Tachometer



The contents of the tachometer can be selected:

(a)

Blank

(b)

Hybrid system indicator

(c)

Eco indicator

(d)

Tachometer


-

Navigation

The navigation function display can be set to on/off.

(1)

ON

(2)

OFF


-

Driving support

The driving support function display can be set to on/off.

(1)

ON

(2)

OFF


-

Compass

The compass display function display can be set to on/off.

(1)

ON

(2)

OFF


-

Audio

The audio display function display can be set to on/off.

(1)

ON

(2)

OFF




HUD Rotation

The tilt of the HUD image can be changed:

-

Clockwise

-

Counterclockwise




Road Sign Assist System (Models with Road Sign Assist System)
Item Available Setting
RSA

The road sign assist system can be set to on/off:

-

ON

-

OFF



Notification Method*

Notification method can be selected:

-

Above Speed Limit:

(1)

No Notification

(2)

Only visual

(3)

Visual & Audio


-

Overtaking:

(1)

No Notification

(2)

Only visual

(3)

Visual & Audio


-

Others:

(1)

No Notification

(2)

Only visual

(3)

Visual & Audio




Notification Level*

Excess speed notification level can be selected:

-

10 km/h (5 mph)

-

5 km/h (3 mph)

-

2 km/h (1 mph)



Excess speed notification level can be selected:

-

5 km/h

-

3 km/h

-

1 km/h




HINT:

*: Available settings differ by destination.


Dynamic Radar Cruise Control with Road Sign Assist (Models with Road Sign Assist System)
Item Available Setting
Dynamic Radar Cruise Control with Road Sign Assist

The dynamic radar cruise control with road sign assist system can be set to on/off:

-

ON

-

OFF




Vehicle Settings
Item Available Setting
Rear Seat Reminder

The rear seat reminder system can be set to on/off:

-

ON

-

OFF




Meter Settings
Item Available Setting

*1: Gasoline models

*2: HV models

*3: Models with navigation system

*4: Models with voice recognition system

Language

The language used on the multi-information display can be selected:

-

English

-

French



Units

The unit displayed on the multi-information display can be selected:

-

km (km/L)

-

km (L/100 km)



Eco Indicator*1

The eco indicator can be set to on/off:

-

ON

-

OFF



EV indicator*2

The EV indicator can be set to on/off:

-

ON

-

OFF



Fuel Economy Tab Hybrid System*3

The eco guidance can be set to on/off:

-

ON

-

OFF



Fuel Economy

The fuel economy type can be selected:

-

Trip Average

-

Total Average

-

Tank Average



Vehicle Information Tab Display Contents

The following displays can be switched to on/off:

-

Energy Monitor*2



Drive Info Type

The drive information type can be selected:

-

Trip

-

Total



Drive Info Items

The upper and lower of drive information items can be selected:

-

Average Vehicle Speed

-

Distance Travelled

-

Elapsed Time



Pop-up Display

The following displays that appear as soon as the set conditions are met can be set to on/off:

-

Turn-by-Turn Navigation*3

-

Telephone

-

Audio Operation

-

Volume Operation

-

Voice Control*4

-

Fuel Price

-

Brightness



Multi-information Display OFF Multi-information display is turned off.
Default Settings The set items can be initialized.



iv.

Interruption Display

·

When a warning is necessary, the warning message interrupts the current display on the multi-information display.

·

A warning message is displayed via an interrupt display when a vehicle malfunction occurs to warn the driver. Also, an advice message is displayed via an interrupt display depending on the situation, such as when the driver must proceed with caution.

·

The buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

·

The intersection guidance*, telephone display, audio operation and volume operation displays are linked with the multimedia system or navigation system and displayed via an interrupt display.

*: Models with navigation system



Hybrid System (HV Models)
1.

The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU.

Message Buzzer

*: This message is displayed together with one of the listed messages.

CDY-2 -
CDY-2E -
RES-1 -
RES-2 -
RESOLVER-1 NOT ADJUSTED -
RESOLVER-2 NOT ADJUSTED -
RESOLVER-R NOT ADJUSTED -
Shift to P Before Exiting Vehicle Sounds
Hybrid System Malfunction Do Not Tow This Vehicle Sounds
Shift is in N Release Accelerator Before Shifting*A
Shift Out of N Release Accelerator Before Shifting*A
Sounds
Press Brake when Vehicle is Stopped Hybrid System may Overheat Sounds
Traction Battery Needs to be Protected Shift into P to Restart Sounds
Hybrid System Malfunction*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Check Engine*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Hybrid Battery System Malfunction*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Accelerator System Malfunction*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Hybrid System Stopped*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Engine Stopped*
·

Visit Your Dealer

·

Output Power Greatly Reduced Visit Your Dealer

·

Output Power Reduced Visit Your Dealer

·

Stop in a Safe Place See Owner's Manual

·

Stop in a Safe Place within 0.3 miles*A

·

Stop in a Safe Place within 0.5 km (0.3 miles)*A

·

Stop in a Safe Place within 0.6 miles*A

·

Stop in a Safe Place within 1.0 km (0.6 miles)*A

·

Stop in a Safe Place within 0.9 miles*A

·

Stop in a Safe Place within 1.5 km (0.9 miles)*A

·

Stop in a Safe Place within 1.2 miles*A

·

Stop in a Safe Place within 2.0 km (1.2 miles)*A

·

Stop in a Safe Place within 3.1 miles*A

·

Stop in a Safe Place within 5.0 km (3.1 miles)*A

·

Stop in a Safe Place within 6.2 miles*A

·

Stop in a Safe Place within 10 km (6.2 miles)*A

·

Output Power Reduced Avoid Shifting to N

·

Avoid Shifting to N Visit Your Dealer

·

Hybrid System Stopped Stop in a Safe Place

·

Shift to P See Owner's Manual


Sounds
Traction Battery Needs to be Protected Refrain from the Use of N Position Sounds
Release Accelerator
(and image display)
Sounds
Drive-Start Control Malfunction Visit Your Dealer
(and image display)
Sounds
Reverse Speed Control Activated Sounds
Brake Override Malfunction Visit Your Dealer
(and image display)
Sounds
Hybrid System Overheated Output Power Reduced
(and image display)*A
Sounds
Accelerator and Brake Pedals Pressed Simultaneously
(and image display)
-
Maintenance Required for Traction Battery Cooling Parts See Owner's Manual*A
Hybrid Battery Cooling Warning Visit Your Dealer*A
-
Maintenance Required for Traction Battery Cooling Parts See Owner's Manual*A
Hybrid Battery Cooling Warning Visit Your Dealer*A
Sounds
Low Auxiliary Battery See Owner's Manual -
EV Mode Unavailable Sounds
EV Mode Unavailable System Warming Up Sounds
EV Mode Unavailable Hybrid Battery Low Sounds
EV Mode Unavailable Speed Range Exceeded Sounds
EV Mode Unavailable Reduce Acceleration to Activate Sounds
EV Mode Deactivated Sounds
EV Mode Deactivated Hybrid Battery Low Sounds
EV Mode Deactivated Speed Range Exceeded Sounds
EV Mode Deactivated Accelerator Pressed Too Far*A
EV Mode Deactivated Reduce Acceleration to Activate*A
Sounds
Accelerator Pedal is Pressed -
Have Traction Battery Inspected -
Diagnosing Hybrid Battery -
Vehicle Start Will Soon be Disabled Have Traction Battery Inspected Sounds
Vehicle Start Disabled Until Traction Battery Inspected -

HINT:

*A: Displayed message may vary depending on specifications.



Engine System (HV Models)
1.

The combination meter assembly displays the following messages based on signals received from the ECM and engine oil level sensor.

Message Buzzer
Check Engine Visit Your Dealer Sounds
Reduced Engine Power Visit Your Dealer Sounds
Engine Maintenance Required Visit Your Dealer Sounds
Engine Coolant Temp High Stop in a Safe Place See Owner's Manual
(and image display)
Sounds
Oil Pressure Low Stop in a Safe Place See Owner's Manual
(and image display)
Sounds
Engine Oil Level Low Add or Replace -
Fuel Low -


Engine System (Gasoline Models)
1.

The combination meter assembly displays the following messages based on signals received from the ECM and engine oil level sensor.

Message Buzzer
Release Accelerator
(and image display)
Sounds
Check Engine Visit Your Dealer Sounds
Check Engine Reduced Engine Power Visit Your Dealer Sounds
Engine Maintenance Required Visit Your Dealer Sounds
Engine Coolant Temp High Stop in a Safe Place See Owner's Manual
(and image display)
Sounds
Oil Pressure Low Stop in a Safe Place See Owner's Manual
(and image display)
Sounds
Drive-Start Control Malfunction Visit Your Dealer
(and image display)
Sounds
Reverse Speed Control Activated Sounds
Brake Override Malfunction Visit Your Dealer
(and image display)
Sounds
Engine Oil Level Low Add or Replace -
Accelerator and Brake Pedals Pressed Simultaneously
(and image display)
-
Fuel Low -


Dynamic Radar Cruise Control System
1.

The combination meter assembly displays the following messages based on signals received from the hybrid vehicle control ECU*1 or ECM*2.

*1: HV Models

*2: Gasoline Models

Message Buzzer
Radar Cruise Control Unavailable Clean Sensor Sounds
Radar Cruise Control Unavailable Sounds
Cruise Control Malfunction Visit Your Dealer Sounds
Radar Cruise Active Please Pay Attention to Other Vehicles -
Dynamic radar cruise control system status
(image display)
-


Lane Tracing Assist System (Models with Lane Tracing Assist System)
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer
ADJUSTING FORWARD CAMERA -
Lane departure alert
(image display)
Sounds
LTA Hold Steering Wheel
(and image display)
-
LTA Steering Assist Unavailable Hold Steering Wheel
(and image display)
Sounds
LTA Hold Steering Wheel
(and image display)
Sounds
LTA Malfunction Visit Your Dealer Sounds
LTA Unavailable Sounds
LTA Unavailable Below Approx. 50km/h -
LTA Unavailable at Current Speed -
Lane tracing assist system status
(image display)
-


Road Sign Assist System
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer
Front Camera Unavailable -
Front Camera Vision Blocked Clean and Demist Windshield -
RSA Malfunction Visit Your Dealer Sounds


Transmission System (Models with CVT)
1.

The combination meter assembly displays the following messages based on signals received from the transmission control ECU.

Message Buzzer
Transmission Oil Temp. High Stop in a Safe Place and See Owner's Manual Sounds


Transmission System (Models with Manual Transaxle)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
Press the Accelerator Pedal when Starting Off -


Brake System
1.

The combination meter assembly displays the following messages based on signals received from the skid control ECU.

Message Buzzer

*: HV Models

Braking Power Low Stop in a Safe Place See Owner's Manual Sounds
Antilock Brake System Malfunction Visit Your Dealer Sounds
Braking Power Low Visit Your Dealer* Sounds
Low Braking Power Stop in a Safe Place See Owner's Manual* Sounds
Traction Control Turned OFF -
Secondary Collision Brake system Malfunction Visit Your Dealer Sounds


Electric Power Steering System
1.

The combination meter assembly displays the following messages based on signals received from the power steering ECU.

Message Buzzer

*1: HV Models

*2: Gasoline Models

Power Steering Malfunction Steering Power Low Visit Your Dealer Sounds
Voltage Abnormality Steering Power Low Visit Your Dealer Sounds
Steering Power Low Visit Your Dealer Sounds
Power Steering Malfunction Visit Your Dealer Sounds
Hybrid System Stopped Steering Power Low*1 Sounds
Engine Stopped Steering Power Low*2 Sounds


Parking Support Brake System (Models with Parking Support Brake System)
1.

The combination meter assembly displays the following messages based on signals received from the parking assist ECU assembly.

Message Buzzer
WRITE ZERO-POINT OF STEERING ANGLE -
END OF ADJUSTMENT -
MEMORY ERROR -
Switch to Brake
(and image display)
Sounds
Press Brake Pedal
(and image display)
Sounds
Brake! Sounds
Object Detected Acceleration Reduced Sounds
PKSB Malfunction Visit Your Dealer Sounds
PKSB Unavailable -
Parking Support Brake Unavailable Remove the Dirt of Rear Camera -


Blind Spot Monitor System (Models with Blind Spot Monitor System)
1.

The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor RH.

Message Buzzer
Blind Spot Monitor Unavailable Sounds
Blind Spot Monitor Malfunction Visit Your Dealer Sounds


Smart Entry and Start System (HV Models)
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.

Message Buzzer
Push and Hold Power Switch for Emergency Stop Sounds
Shift to N and Push POWER Switch to Restart Sounds
Hybrid System Stopped Shift into P Sounds
Hybrid System Stopped Stop in a Safe Place Sounds
Shift to P when Parked Sounds
Auto Power OFF to Conserve Battery -
Key Not Detected Check Key Location Sounds
Smart Entry & Start System Malfunction See Owner's Manual Sounds
Turn Power OFF Sounds
Key Detected in Vehicle -
Press Brake Pedal and Touch Power Switch with Key Sounds
Not Ready to Drive Press Brake Pedal and Push Power Switch to Start -
Press Brake Pedal and Push Power Switch to Start Sounds
Push Power Switch while Turning Steering Wheel in Either Direction Sounds
Shift to P to Start -
Key Battery Low Replace Key Battery Sounds
A New Key has been Registered Contact Your Dealer for Details -
Press Brake Pedal and Push Power Switch to Start
(and image display)
-


Smart Entry and Start System (Gasoline Models) (Models with Smart Entry and Start System)
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.

Message Buzzer

*1: Models with CVT

*2: Models with manual transaxle

Push and Hold Engine Switch for Emergency Stop Sounds
Shift to N and Push ENGINE Switch to Restart*1 Sounds
Press Clutch Pedal and Push Engine Switch to Restart*2 Sounds
Engine Stopped Shift into P Position*1 Sounds
Engine Stopped Stop in a Safe Place Sounds
Shift to P when Parked*1 Sounds
Auto Power OFF to Conserve Battery -
Key Not Detected Check Key Location Sounds
Smart Entry & Start System Malfunction See Owner's Manual Sounds
Turn Power OFF Sounds
Key Detected in Vehicle -
Press Brake Pedal and Touch Engine Switch with Key*1 Sounds
Press Clutch Pedal and Touch Engine Switch with Key*2 Sounds
Not Ready to Drive Press Brake Pedal and Push Engine Switch to Start*1 -
Not Ready to Drive*2 -
Press Brake Pedal and Push Engine Switch to Start*1 Sounds
Press Clutch Pedal and Push Engine Switch to Start*2
(and image display)
Sounds
Push Engine Switch while Turning Steering Wheel in Either Direction Sounds
Key Battery Low Replace Key Battery Sounds
A New Key has been Registered Contact Your Dealer for Details -
Press Brake Pedal and Push Engine Switch to Start*1
(and image display)
-
Press Clutch Pedal and Push Engine Switch to Start*2
(and image display)
-


Supplemental Restraint System (SRS) Airbag System
1.

The combination meter assembly displays the following messages based on signals received from the airbag ECU assembly.

Message Buzzer
SRS Airbag System Malfunction Visit Your Dealer Sounds


Pre-collision System
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer
CHECKING PRE-COLLISION BRAKE -
BRAKE! Sounds
Front Camera Unavailable -
Front Camera Vision Blocked Clean and Demist Windshield -
Front Camera Unavailable See Owner's Manual -
Pre-Collision System Malfunction Visit Your Dealer Sounds
VSC Turned OFF Pre-Collision Brake System Unavailable -
Pre-Collision System Radar In Self Calibration Unavailable See Owner's Manual -
Pre-Collision System Unavailable -
Pre-Collision System Unavailable Clean Sensor -
Pre-Collision System OFF -


Power Window System
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer
Window Open Sounds


Door
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer

*: If the vehicle has reached a speed of 5 km/h (3 mph).

Driver door open
(image display)
-
Front passenger door open
(image display)
Rear passenger door LH open
(image display)
Rear passenger door RH open
(image display)
Hood open
(image display)
Back door open
(image display)
Driver door open while driving*
(image display)
Sounds
Front passenger door open while driving*
(image display)
Rear passenger door LH open while driving*
(image display)
Rear passenger door RH open while driving*
(image display)
Hood open while driving*
(image display)
Back door open while driving*
(image display)


Lighting System
1.

The combination meter assembly displays the following messages based on signals received from the headlight ECU sub-assembly RH and headlight ECU sub-assembly LH or main body ECU.

Message Buzzer
Headlight System Uninitialized Visit Your Dealer -
Front Camera Unavailable -
Front Camera Vision Blocked Clean and Demist Windshield -
Turn Lights OFF Sounds
Headlight System Malfunction Visit Your Dealer Sounds
To Activate Automatic High Beam, Switch Headlights to High Beam -


Vehicle Proximity Notification System (Models with Vehicle Proximity Notification System)
1.

The combination meter assembly displays the following messages based on signals received from the vehicle approaching speaker controller.

Message Buzzer
Acoustic Vehicle Alerting System Malfunction Visit your Dealer Sounds


Others
1.

The combination meter assembly displays the following messages based on signals.

Message Buzzer

*: Models with manual transaxle

Roads may be Icy Drive with Care
(and image display)
Sounds
Engine Oil Level Low Add or Replace Sounds
Press the accelerator pedal when starting off -
Check fuel cap Sounds
Low Auxiliary Battery See Owner's Manual
(and image display)
-
Low Battery Turn Power OFF Sounds
iMT system malfunction Visit your dealer* Sounds


Reminder Service/Operation Advisory Function
1.

The reminder service/operation advisory function displays the following setting change reminders and operation support displays via an interrupt display when conditions are met according to the vehicle condition and various switch operations.

Reminder Details Display Condition Multi-information Display Choice
Headlight illumination reminder When system determines vehicle is being driven at night with headlights turned off Turn ON Headlamps -
Turn headlights off after stopping reminder (when light control switch is set to HEAD) When headlights are illuminated after ignition switch is turned off (light control switch is in HEAD position) Headlamps Are ON -
Turn headlights off after stopping reminder (when light control switch is set to AUTO) When headlights are illuminated after ignition switch is turned off (light control switch is in AUTO position) Headlamps Are ON
Turn Headlamps OFF?
·

Yes

·

No


Rear seat reminder When IG is turned OFF after the rear door is opened then closed during IG ON or before IG ON Attention:
Check Rear Seat
-
Close door windows during wiper operation reminder If any door window is open when attempting to operate wipers Close Open Windows?
·

Yes

·

No






b.

Buzzer

i.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

*1: HV models

*2: Gasoline models

*3: Models with smart entry and start system

*4: Models without smart entry and start system

*5: Except models with manual transaxle

Priority Item
1 READY*1
2 Pre-collision System Warning
3 Hybrid System Start while Driving Notice Buzzer*1
4 Push Power Switch*1/Engine Switch*2 Operation while Driving Warning*3
5 Key Reminder*4
6 Vehicle Proximity Warning
7 Pedestrian Warning
8 Lane Tracing Assist System Cancel Warning
9 Lane Tracing Assist System Warning
10 Hands off Steering Wheel Warning
11 Unexpected Vehicle Motion Warning (Level 1)
12 Unexpected Vehicle Motion Warning (Level 2)
13 Brake Fluid Low Warning*2
14 Engine Oil Pressure Warning
15 Seat Belt Warning (Once)
16 Seat Belt Warning (Level 2)
17 Seat Belt Warning (Level 1)
18 EPS Warning (Once)
19 EPS Warning (Intermittent)
20 Accelerator Depression in N Position*1
21 Hybrid System Warning (Intermittent: Pattern 1)*1
22 Hybrid System Warning (Intermittent: Pattern 2)*1
23 Hybrid System Warning (Intermittent: Pattern 3)*1
24 Hybrid System Warning (Intermittent: Pattern 4)*1
25 Hybrid System Warning (Continuous)*1
26 Hybrid System Warning (Once)*1
27 Auxiliary Power Source System Warning
28 Towing Prohibition Notification*1
29 Road Sign Assist Indication
30 Engine Coolant Temperature Warning
31 Door Open when Shift Position not P Warning*3
32 Smart Entry and Start System Warning (Intermittent 1)*3
33 Shift P Request when Start Warning
34 Rear Seat Reminder System Warning
35 Brake Pedal Operation Request
36 Smart Entry and Start System Warning (Intermittent 2)*3
37 Smart Entry and Start System Warning (Once)*3
38 Multi-information Display Warning
39 Check Engine Warning
40 Accelerator Hold Warning*1
41 Hybrid Battery Check Request Notification
42 Hybrid Battery Low Warning (Continuous)*1
43 Hybrid Battery Low Warning (Intermittent)*1
44 Brake System Learning
45 Start Brake System Check
46 End Brake System Check
47 Brake System Malfunction
48 Unfunctional Brake System (Pattern 1)
49 Unfunctional Brake System (Pattern 2)
50 Hybrid Unit Overheat Warning*1
51 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning
52 Low Speed Zone Leading Vehicle Lost Warning
53 Immobiliser Certification Reminder*3
54 Parking Brake Engaged Warning
55 Door Open while Driving Warning
56 Vehicle Sway Warning
57 Shift Reject Warning*5
58 Traction Battery Cooling Performance Down Notification*1
59 EV Drive Mode Reject Warning*1
60 Light Reminder
61 Brake System Application Driven (Twice)
62 Brake System Application Driven (Pattern 1)
63 Brake System Application Driven (Pattern 2)
64 Electrical Ignition Switch System Control
65 Pre-collision Brake Assist Notification Buzzer
66 Pre-collision Warning Buzzer
67 Brake Inspections Standby Mode Notification Buzzer
68 Radar Axis Adjustment Complete Notification Buzzer
69 Camera Axis Adjustment Complete Notification Buzzer
70 Pre-collision Braking Notification Buzzer
Return from Brake Inspection Mode Notification Buzzer
Radar Axis Adjustment Incomplete Notification Buzzer
Camera Axis Adjustment Start Notification Buzzer
71 Turn Signal/Hazard Warning Operation



c.

Rear Seat Belt Warning

i.

The rear seat belt warning function indicates the state of the rear seat belts.


ii.

The combination meter assembly receives a rear seat belt warning signal based on the rear seat belt buckle switches and courtesy switches for the rear doors, occupant detection sensor (for rear seat). When the signal is received, combination meter assembly operates the lights. If a warning is necessary, the buzzer in the combination meter assembly will also sound.


iii.

The flow of operations that results in a rear seat belt warning is as follows:

Y259621E01
0.313,0.573 0.771,0.771 0.458,0.198 10 false (a) 4.177,0.583 4.708,0.792 0.531,0.208 10 false (b), (c)

Step Condition Transition Rear Seat Belt Warning Indicator Buzzer

*1: Sound cycle is 1.2 seconds.

*2: Sound cycle is 0.4 seconds.

*3: Except models with manual transaxle

(a) The ignition switch is turned off. Rear seat belt warning indicator is not illuminated. No Sound
(b) Any of the rear seat belts are unfastened. Seats with an unfastened seat belt will be illuminated or blinked regardless of the number of occupants. If the vehicle speed exceeds 20 km/h (approximately 12 mph):
1.

Sounds once*1

2.

Sounds for an additional 24 seconds*1

3.

Sounds for an additional 100 seconds*2


(c) When one of the following conditions is met, the buzzer will stop sounding.
- The seat belt is refastened.
- The vehicle speed decreases to less than approximately 2 km/h (approximately 1.2 mph) and either the parking brake is applied or the shift position is P*3.
·

Seats with an unfastened seat belt will be blinked regardless of the number of occupants.

·

The warning will be blinked and then illuminated.


Stops sounding