Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM › 2020.03–2020.07
NM36W0E _58 Vehicle Interior _088396 METER / GAUGE / DISPLAY _0421352 HEADUP DISPLAY SYSTEM CO CONTROL F

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  CONTROL  HEADUP DISPLAY CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: HV models

*2: Gasoline models

*3: Models with navigation system

*4: Models with parking support brake system

Head-up Display (Meter Mirror Sub-assembly) Receives signals from ECUs and switches and projects vehicle information onto the windshield glass.
Combination Meter Assembly
·

Sends information display and master warning display request signals to the head-up display.

·

Sends each type of setting signal to the head-up display.


Hybrid Vehicle Control ECU*1
·

Sends the hybrid system output, regeneration status, shift position signals and drive mode signals to the head-up display.

·

Sends warning display and information display request signals from the dynamic radar cruise control system to the head-up display.


ECM*2
·

Sends engine speed, accelerator operation condition, shift position signals and drive mode signals to the head-up display.

·

Sends warning display and information display request signals from the dynamic radar cruise control system to the head-up display.


Forward Recognition Camera Sends warning display and information display request signals from the pre-collision system, lane tracing assist system, and road sign assist system to the head-up display.
Millimeter Wave Radar Sensor Radiates millimeter radar waves forward, uses the reflected waves to detect the presence of a vehicle traveling ahead, the vehicle-to-vehicle distance, and the relative speed, and then transmits this information to the forward recognition camera.
Steering Pad Switch Assembly Switch the display of multi-information display within combination meter assembly.
Brake Booster with Master Cylinder Assembly*1
·

Skid Control ECU


Transmits signals such as wheel speed to the combination meter assembly.
Brake Actuator Assembly*2
·

Skid Control ECU


Radio and Display Receiver Assembly Sends audio system information and navigation system information*3 signals to the combination meter assembly.
Navigation ECU*3
·

Houses a navigation computer, gyro sensor, GPS receiver and storage device, and processes operation signals or vehicle status signals from the radio and display receiver assembly, controlling the navigation system.

·

Sends image and audio signals, such as navigation information, and the operation status to the radio and display receiver assembly.


Main Body ECU (Multiplex Network Body ECU) Sends a headlight signal to the combination meter assembly.
Clearance Warning ECU Assembly*4 Sends clearance sonar detection request signals and warning display and information display request signals from the parking support brake system to the head-up display.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.


SYSTEM CONTROL


a.

When the meter mirror ECU inputs HUD main switch operation signals, it operates the display on the windshield glass.


b.

The combination meter assembly sends each signal to the meter mirror ECU. Also, when audio-related operations are performed, the radio receiver assembly sends the current condition to the meter mirror ECU. The meter mirror ECU projects each image onto the windshield glass according to received signals.


c.

The meter mirror ECU switches the brightness of the light source used for backlight illumination according to the status of the automatic light control sensor and headlight on/off signals.



FUNCTION


a.

Display Function

i.

When the HUD main switch is turned on after the ignition switch is turned on (IG), this function operates the display on the windshield glass.


ii.

If the ignition switch is turned off while the head-up display is displayed, when the ignition switch is turned back on (IG), the display function resumes operation in the same condition it was in before the ignition switch was turned off.



b.

Automatic Brightness Adjustment Function

i.

The brightness of the head-up display automatically switches to a brightness appropriate for any situation (such as when the display brightness is adjusted by operating the brightness adjustment function) according to the surrounding brightness detected by the automatic light control sensor.


ii.

When the surrounding brightness is darker than 70 lx (dusk), dimmer control changes depending on whether the headlights are on or off.

Y259545E01
2.583,0.333 2.75,0.333 2.75,0.333 2.938,2.104 true 1.75,0.979 2.25,1.313 0.5,0.333 10 false 100000 1.823,1.5 2.24,1.833 0.417,0.333 10 false 10000 1.896,2.031 2.229,2.365 0.333,0.333 10 false 1000 1.969,2.542 2.219,2.875 0.25,0.333 10 false 100 2.042,3.063 2.208,3.396 0.167,0.333 10 false 10 2.135,3.583 2.302,3.917 0.167,0.333 10 false 1 2.271,3.729 2.438,4.063 0.167,0.333 10 false 1 3.021,3.729 3.188,4.063 0.167,0.333 10 false 10 3.667,3.729 3.833,4.063 0.167,0.333 10 false 70 4.531,3.729 4.865,4.063 0.333,0.333 10 false 1000 5.302,3.729 5.719,4.063 0.417,0.333 10 false 10000 5.708,0.813 7.083,1.094 1.375,0.281 10 false Maximum Brightness 3.573,0.719 5.25,0.969 1.677,0.25 10 false Automatic Dimmer Table 0.135,2.302 1.927,2.604 1.792,0.302 10 false Display Brightness [cd/m2] 0.021,0.229 2.51,0.625 2.49,0.396 10 false The dimming control changes depending on the headlight ON/OFF status. 0.135,4.417 6.521,4.667 6.385,0.25 10 false *: Head-up Display display brightness adjustment range by operating the brightness adjustment function 3.865,3.729 4.115,4.063 0.25,0.333 10 false 100 6.073,3.729 6.573,4.063 0.5,0.333 10 false 100000 0.938,3.292 2.292,3.531 1.354,0.24 10 false Minimum Brightness 2.583,4.031 6.167,4.333 3.583,0.302 10 false Ambient Illuminance (Natural Light, Instrument Panel) [lx] 6.479,1.615 7.063,1.948 0.583,0.333 10 false *



c.

Manual Brightness Adjustment Function

i.

The brightness of the head-up display can be adjusted by operating the combination meter assembly display with the steering pad switches.

Y259626E01
2.427,4.458 5.094,4.708 2.667,0.25 10 false Display Brightness Adjustment Operation 0.958,0.146 2.49,0.344 1.531,0.198 10 false Brightness 1.135,0.438 1.75,0.635 0.615,0.198 10 false 257.0% 1.135,0.792 1.75,0.99 0.615,0.198 10 false 203.3% 1.135,1.135 1.75,1.333 0.615,0.198 10 false 160.4% 1.135,1.49 1.75,1.688 0.615,0.198 10 false 126.6% 1.25,1.844 1.865,2.042 0.615,0.198 10 false 100% 1.208,2.188 1.823,2.385 0.615,0.198 10 false 79.0% 1.208,2.542 1.823,2.74 0.615,0.198 10 false 62.4% 1.208,2.885 1.823,3.083 0.615,0.198 10 false 49.2% 1.208,3.229 1.823,3.427 0.615,0.198 10 false 38.9% 1.208,3.583 1.823,3.781 0.615,0.198 10 false 30.7% 1.208,3.938 1.823,4.135 0.615,0.198 10 false 24.3%



d.

Display Position Adjustment Function

i.

The position of the head-up display can be vertically adjusted by operating the combination meter assembly display with the steering pad switches.



e.

Displayed Item Customization Function

i.

The following displayed items can be selected by changing the setting of the combination meter assembly.

·

Tachometer Settings

·

Navigation*

·

Driving Assist

·

Audio

·

HUD Rotation

*: Models with navigation system