Home › Engine / Hybrid System › M15A-FXE (EMISSION CONTROL) › EVAPORATIVE EMISSION CONTROL SYSTEM
NM36W0E _51 Engine / Hybrid System _087993 M15A-FXE EMISSION CONTROL _0420250 EVAPORATIVE EMISSION CONTROL SYSTEM CO CONTROL F

M15A-FXE EMISSION CONTROL  EVAPORATIVE EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the evaporative emission control system are as follows:

Component Function
ECM Controls the purge VSV in accordance with the signals from various sensors in order to achieve a purge volume that suits the driving conditions.
Canister Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank sub-assembly.
Purge VSV (No. 1 Vacuum Switching Valve Assembly) Opens in accordance with the signals from the ECM when the system is purging in order to send the fuel vapor that was absorbed by the canister into the intake manifold.



SYSTEM CONTROL


a.

The fuel vapors absorbed by the canister are drawn to the intake port through the purge port installed downstream from the throttle valve.


b.

The ECM controls the canister purge VSV (No. 1 vacuum switching valve assembly) that is installed partway down the purge pipe to control the canister purge flow rate according to the driving conditions.


c.

A canister integrated with the fuel pump is used to reduce the number of components and save space in the engine compartment.