Home › Engine / Hybrid System › M15A-FXE (COOLING) › COOLING FAN SYSTEM › 2020.03–2020.07
NM36W0E _51 Engine / Hybrid System _087995 M15A-FXE COOLING _0420247 COOLING FAN SYSTEM CO CONTROL F

M15A-FXE COOLING  COOLING FAN SYSTEM  CONTROL  COOLING FAN CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
ECM Sends control signals to the cooling fan ECU (built into cooling fan motor).
Cooling Fan Motor Cooling Fan ECU Operates according to signals received from the ECM.
Engine Coolant Temperature Sensor Detects the engine coolant temperature.
Crank Position Sensor Detects the engine speed.
Air Conditioning Amplifier Assembly Transmits the operating state of the air conditioning system and refrigerant pressure to the ECM.
Hybrid Vehicle Control Computer Transmits the vehicle speed signal to the ECM.


FUNCTION


a.

The ECM sends signals to the cooling fan ECU according to the driving conditions and controls the cooling fan to the optimum rotating speed to improve the cooling performance while significantly increasing quietness.


b.

The ECM controls the cooling fan rotating speed steplessly based on the engine coolant temperature, air conditioning operation condition, engine speed and inverter coolant temperature.