Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM36W0E _52 Drivetrain _088436 P910 HYBRID TRANSMISSION / TRANSAXLE _0421401 HYBRID TRANSAXLE SYSTEM GE GENERAL F

P910 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A P910 hybrid vehicle transaxle is used.


b.

Containing the motor (MG2) for driving the vehicle and generator (MG1) for generating electrical power, this transaxle uses a continuously variable transmission mechanism with a compound gear unit that achieves smooth and quiet operation.


c.

This hybrid vehicle transaxle assembly consists primarily of a generator (MG1), motor (MG2), power split planetary gear unit, counter gear, final gear, differential gear unit and oil pump.


d.

By utilizing a pluriaxial configuration for the generator (MG1) and the motor (MG2), the overall length of the transaxle has been shortened. A compound gear that consists of the ring gear of the power split planetary gear, counter drive gear and parking lock gear is utilized to drastically reduce size and weight. By using high accuracy machining for the gear tooth surfaces, low-loss bearings and a dry-sump lubrication mechanism, driving losses have been reduced resulting in improved fuel economy and reduced noise.


e.

This transaxle has a 4-shaft configuration. The power split planetary gear unit, an oil pump and generator (MG1) are provided on the main shaft. The MG2 reduction gear and motor (MG2) are provided on the 2nd shaft. The counter driven gear and the final drive gear are provided on the 3rd shaft. The final driven gear and the differential gear unit are provided on the 4th shaft.


f.

A differential pre-torque mechanism is used. Straightline stability and acceleration performance during periods of low load and low differential rotation when the vehicle is being driven normally are enhanced.


g.

Lubrication and cooling of the generator (MG1) and motor (MG2) are performed by the trochoid type oil pump of the main shaft, and lubrication of the various gears of the power split planetary gear unit, MG2 reduction gear, motor speed reduction gear unit and differential gear unit is performed by the output driven oil pump. Through the use of the output driven oil pump, lubrication of the various gears and bearings is accomplished via a dry-sump mechanism, which provides the optimum amount of lubrication while reducing agitation losses, achieving even greater power transmission efficiency. Also, a water-cooled type oil cooler which optimizes the flow of ATF is used to achieve high cooling performance, resulting in a high efficiency and high output powertrain.

X144845C01
4.5,1.917 5.583,1.25 5.583,1.25 5.75,1.25 true 4,1.917 4.167,0.5 4.167,0.5 4.333,0.5 true 4.417,1.823 4.583,0.656 4.583,0.656 4.75,0.656 true 4.25,2.063 5.583,2.51 5.583,2.51 5.75,2.51 true 4.25,2.74 5.583,3.188 5.583,3.188 5.75,3.188 true 4.135,3.563 5.583,4 5.583,4 5.75,4 true 4.417,2.938 5.583,3.583 5.583,3.583 5.75,3.583 true 4.417,4.115 5.583,4.427 5.583,4.427 5.75,4.427 true 4.438,5.604 4.833,6.417 4.833,6.417 5,6.417 true 3.417,6.479 3.583,6.479 3.583,6.479 4.063,5.979 true 1.521,2.813 1.688,2.813 1.688,2.813 3.135,3.25 true 1.656,1.333 1.823,1.333 1.823,1.333 3.271,1.771 true 1.635,2.01 1.802,2.01 1.802,2.01 2.635,2.26 true 1.458,1.25 1.771,1.406 0.313,0.156 10 false *1 1.427,1.906 1.74,2.063 0.313,0.156 10 false *2 1.302,2.729 1.615,2.885 0.313,0.156 10 false *3 3.198,6.396 3.51,6.552 0.313,0.156 10 false *4 5.823,4.344 6.135,4.5 0.313,0.156 10 false *5 5.823,3.917 6.135,4.073 0.313,0.156 10 false *6 5.833,3.5 6.146,3.656 0.313,0.156 10 false *7 5.823,3.104 6.135,3.26 0.313,0.156 10 false *8 5.823,2.427 6.135,2.583 0.313,0.156 10 false *9 4.823,0.573 5.292,0.729 0.469,0.156 10 false *10 4.406,0.417 4.875,0.573 0.469,0.156 10 false *11 1.573,2.323 1.885,2.479 0.313,0.156 10 false *a 1.635,3.313 1.948,3.469 0.313,0.156 10 false *b 1.802,3.938 2.115,4.094 0.313,0.156 10 false *c 2.896,5.271 3.208,5.427 0.313,0.156 10 false *d 5.073,6.323 5.385,6.479 0.313,0.156 10 false *e 5.823,1.167 6.135,1.323 0.313,0.156 10 false *f
*1 Generator (MG1) *2 Oil Pump
*3 Motor (MG2) *4 Final Driven Gear
*5 MG2 Reduction Gear *6 Final Drive Gear
*7 Counter Driven Gear *8 Planetary Ring Gear
*9 Power Split Planetary Gear Unit *10 Counter Drive Gear
*11 Parking Lock Gear - -
*a Main Shaft *b 3rd Shaft
*c 2nd Shaft *d 4th Shaft
*e Differential Gear Unit *f Compound Gear




SPECIFICATION


Item Specification

*1: The ratio of the combination of the counter and final gears.

*2: Weight shows the figure with the fluid fully filled.

Transaxle Type P910
Shift Position P / R / N / D / B
Power Split Planetary Gear Unit No. of Sun Gear Teeth 30
No. of Pinion Gear Teeth 23
No. of Ring Gear Teeth 78
MG2 Reduction Gear No. of Drive Gear Teeth 17
No. of Driven Gear Teeth 53
Counter Gear No. of Drive Gear Teeth 65
No. of Driven Gear Teeth 53
Final Gear No. of Drive Gear Teeth 21
No. of Driven Gear Teeth 73
Total Speed Reduction Ratio*1 2.834
Fluid Type Toyota Genuine ATF WS
Fluid Capacity Liters (US qts, Imp. qts) 2.6 (2.7, 2.3)
Weight (Reference)*2 kg (lb) 74.6 (164.5)