CONSTRUCTION
A coil spring type transaxle damper is used to transmit motive force from the engine.
Optimized spring rigidity reduces resonance, helping to reduce vibration and noise.
The coil springs, which are aligned in series, measured improvements in silence due to the helix angles, which are arranged in series, and low rigidity construction.
A torque limiter against the flywheel is used to prevent excessive torque from being transmitted to the transaxle. This allows for the use of small components of suitable strength and achieves a compact and lightweight design for the transaxle unit.
| *1 | Transaxle Damper (Transmission Input Damper Assembly) | *2 | Coil Spring |
| *3 | Input Shaft (Transaxle Side) | *4 | Crankshaft (Engine Side) |
| *a | Coil Spring Series Arrangement Construction | *b | A-A Cross Section |
| *c | Torque Limiter | *d | Torque Fluctuation Absorbing Mechanism |