CONSTRUCTION
A trochoid type oil pump is used to lubricate and cool MG1 and MG2. Engine torque is supplied to the oil pump drive rotor via the oil pump drive shaft, and when the engine is operating, oil is circulated to MG1 and MG2 to enhance the lubrication efficiency and cooling performance. Also, a relief valve is provided to prevent the oil pump from generating unnecessarily high pressure, helping to reduce driving losses.
| *1 | Rear Transaxle Case Cover | *2 | Oil Pump Driven Rotor |
| *3 | Oil Pump Drive Shaft | *4 | Oil Pump Drive Rotor |
| *5 | Relief Valve | - | - |
For information about the output driven oil pump which uses a dry-sump lubrication mechanism, refer to "LUBRICATION MECHANISM".