CONSTRUCTION
In addition to the trochoid type oil pump that lubricates and cools MG1 and MG2, a dry-sump lubrication mechanism has been adopted to lubricate the various gears of the power split mechanism, motor speed reduction mechanism, reduction mechanism, differential mechanism and bearings.
The dry-sump lubrication mechanism consists of the output driven oil pump and oil delivery pipe.
The dry-sump lubrication mechanism allows the amount of lubrication to be optimized, with the oil surface height lowering during operation reduces losses due to agitation, thereby enhancing the power transmission efficiency of the system.
| *1 | Oil Pump Delivery Pipe | *2 | Output Driven Oil Pump |
| *3 | Gear | *4 | Body Sub-assembly |
| *5 | Cover | *6 | Driven Rotor |
| *7 | Oil Pump Drive Shaft | *8 | Drive Rotor |
| *9 | Strainer Sub-assembly | - | - |
| *a | Oil Surface Height (During Operation) | *b | A-A Cross Section |
|
to Each Gear |
|
from Strainer Sub-assembly |
|
Oil Surface Height Lowering (During Operation) | - | - |