Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM
NM36W0E _51 Engine / Hybrid System _088520 HYBRID / BATTERY CONTROL _0421728 HYBRID CONTROL SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  DETAILS  INVERTER WITH CONVERTER  


CONSTRUCTION


a.

A compact, lightweight inverter with converter assembly, in which the MG ECU, inverter, boost converter and DC-DC converter are integrated, is used. The inverter and boost converter primarily consist of Intelligent Power Modules (IPMs), a reactor, and capacitor. The IPM is an integrated power module consisting of a signal processor, protective function processor, and Insulated Gate Bipolar Transistors (IGBTs).


b.

The inverter with converter assembly ensures heat dissipation through use of a water-cooled cooling system that is isolated from the engine cooling system.


c.

As a safety measure due to the use of high-voltage electricity, interlock switches are provided, which shut off the system main relays via the hybrid vehicle control ECU when the inverter cover sub-assembly upper is removed or a high-voltage connector is disconnected.

W145379C01
0.906,1.375 1.25,1.594 0.344,0.219 11 false *1 0.906,2.188 1.25,2.406 0.344,0.219 11 false *2
*1 Boost Converter / Inverter *2 DC-DC Converter / Reactor
V100135

HV Coolant Outlet
V100136

HV Coolant Inlet



d.

The inverter uses the IPM to perform switching control. The IPMs for generator (MG1) and motor (MG2) each have a bridge circuit consisting of IGBTs. The IPM for generator (MG1) and motor (MG2) uses 6 IGBTs, one for each arm.


e.

The boost converter uses a boost IPM to perform switching control, a reactor to act as an inductor, and a capacitor to accumulate and store electricity. The boost IPM uses IGBT2 for boosting voltage, and IGBT1 for reducing voltage.

W145182E01
0.896,2.094 1.063,2.094 1.063,2.094 1.156,1.604 true 3.042,1.479 3.333,1.083 3.333,1.083 3.5,1.083 true 2.677,2.344 3.427,2.344 true 3.021,4.094 3.333,3.667 3.333,3.667 3.5,3.667 true 1.833,6.854 0.75,6.271 0.75,6.271 0.583,6.271 false 0.719,7.688 0.885,7.688 0.885,7.688 1.656,7.323 true 2.656,6.896 2.99,7.229 2.99,7.229 3.198,7.229 true 2.656,7.354 2.99,7.688 2.99,7.688 3.188,7.688 true 1.865,7.323 0.781,6.74 0.781,6.74 0.615,6.74 false 0.385,1.333 0.813,1.563 0.427,0.229 10 false MG2 0.385,3.563 0.813,3.792 0.427,0.229 10 false MG1 0.979,1.24 1.135,1.438 0.156,0.198 10 false W 1,1.594 1.156,1.792 0.156,0.198 10 false V 1,1.406 1.156,1.604 0.156,0.198 10 false U 0.292,1.854 0.813,2.469 0.521,0.615 10 false Inverter Current Sensor 0.99,3.49 1.146,3.688 0.156,0.198 10 false W 1,3.646 1.156,3.844 0.156,0.198 10 false U 1,3.823 1.156,4.021 0.156,0.198 10 false V 3.542,1 4.417,1.302 0.875,0.302 10 false IPM for MG2 3.5,2.25 3.875,2.469 0.375,0.219 10 false IGBT 3.208,2.917 3.75,3.167 0.542,0.25 10 false Inverter 3.531,3.583 4.406,3.833 0.875,0.25 10 false IPM for MG1 1.958,5.667 2.583,5.917 0.625,0.25 10 false Capacitor 3.781,7.302 4.865,7.552 1.083,0.25 10 false DC-DC Converter 5.677,8.677 6.76,9.094 1.083,0.417 10 false Compressor with Motor Assembly 5.75,6.323 6.667,6.771 0.917,0.448 10 false Hybrid Vehicle Control ECU 0.167,6.188 0.594,6.417 0.427,0.229 10 false IGBT1 3.25,7.146 3.677,7.375 0.427,0.229 10 false IGBT2 3.24,7.594 3.667,7.823 0.427,0.229 10 false IGBT2 0.198,6.656 0.625,6.885 0.427,0.229 10 false IGBT1 0.031,7.604 0.698,7.854 0.667,0.25 10 false Boost IPM 4,5.927 4.667,6.177 0.667,0.25 10 false MG ECU 1.604,7.833 2.188,8.083 0.583,0.25 10 false Reactor 1.146,8.729 2.146,8.979 1,0.25 10 false Boost Converter 2.229,9.448 2.979,9.698 0.75,0.25 10 false HV Battery 3.229,9.156 5.25,9.469 2.021,0.313 10 false Inverter with Converter Assembly


f.

MG ECU

i.

The MG ECU is provided in the inverter with converter assembly. In accordance with the signals received from the hybrid vehicle control ECU, the MG ECU controls the inverter and boost converter in order to drive generator (MG1) or motor (MG2) or cause them to generate electricity.


ii.

The MG ECU transmits information that is required for vehicle control, such as the atmospheric pressure, inverter temperature and any failure information, to the hybrid vehicle control ECU. The MG ECU receives information that is required for controlling generator (MG1) and motor (MG2), such as the required motive force and the temperature of generator (MG1) and motor (MG2), from the hybrid vehicle control ECU.



g.

Temperature Sensor for Inverter with Converter Assembly

i.

For the inverter with converter assembly, there are 5 different temperature sensors; two of them are located at the IPMs for generator (MG1) and motor (MG2), 2 of them are located at the boost converter, and the remaining sensor is located at the HV coolant passage.


ii.

These sensors detect the temperatures at areas inside the inverter with converter assembly, and transmit that temperature information to the hybrid vehicle control ECU via the MG ECU. The hybrid vehicle control ECU optimizes the cooling system according to the temperature information, maintaining the output performance of the inverter with converter assembly.

W145184E01
0.76,2.094 0.885,2.094 0.885,2.094 1.167,1.427 true 3.083,1.25 3.583,1.25 true 3.083,3.333 4,3.333 true 1.792,6.75 0.917,6.417 0.917,6.417 0.75,6.417 true 0.385,1.135 0.802,1.333 0.417,0.198 10 false MG2 0.385,3.385 0.781,3.615 0.396,0.229 10 false MG1 3.521,0.479 4,0.75 0.479,0.271 10 false Inverter 3.646,1.167 4.5,1.396 0.854,0.229 10 false IPM for MG2 4.063,3.25 4.917,3.479 0.854,0.229 10 false IPM for MG1 5.594,4.146 6.688,4.417 1.094,0.271 10 false HV Coolant Flow 4.125,5.26 4.75,5.51 0.625,0.25 10 false MG ECU 5.708,5.25 6.667,5.75 0.958,0.5 10 false Hybrid Vehicle Control ECU 5.385,1.531 7.063,2.188 1.677,0.656 10 false *3: Temperature Sensor on Boost IPM (Upper) 5.375,2.927 7.115,3.5 1.74,0.573 10 false *5: HV Coolant Temperature Sensor 5.396,2.25 7.052,2.802 1.656,0.552 10 false *4: Temperature Sensor on Boost IPM (Lower) 3.51,7.25 4.594,7.542 1.083,0.292 10 false Boost Converter 0.083,6.333 0.76,6.583 0.677,0.25 10 false Boost IPM 1.719,7.188 2.25,7.469 0.531,0.281 10 false Reactor 3.146,3.896 3.406,4.094 0.26,0.198 10 false *2 2.438,5.688 2.698,5.885 0.26,0.198 10 false *4 4.563,4.229 4.823,4.427 0.26,0.198 10 false *5 3.146,1.906 3.406,2.104 0.26,0.198 10 false *1 5.385,0.156 7.094,0.792 1.708,0.635 10 false *1: Temperature Sensor on IPM for MG2 0.24,1.823 0.74,2.51 0.5,0.688 10 false Inverter Current Sensor 0.865,1.063 1.021,1.26 0.156,0.198 10 false W 0.896,1.229 1.052,1.427 0.156,0.198 10 false U 0.896,1.396 1.052,1.594 0.156,0.198 10 false V 0.865,3.323 1.021,3.521 0.156,0.198 10 false W 0.885,3.49 1.042,3.688 0.156,0.198 10 false U 0.885,3.677 1.042,3.875 0.156,0.198 10 false V 1.865,5.688 2.125,5.885 0.26,0.198 10 false *3 5.396,0.844 7.063,1.469 1.667,0.625 10 false *2: Temperature Sensor on IPM for MG1



h.

Inverter Current Sensor

i.

The inverter current sensors detect the amperage of the 3-phase alternating current that actuates generator (MG1) and motor (MG2). This actual amperage is used as feedback by the MG ECU.


ii.

Current sensors are used for the current sent to the three-phase windings of generator (MG1) and motor (MG2). The current sensors are located in the inverter with converter assembly for the U, V and W phases of each generator and motor.

W145436E01
3.833,1.885 4.417,1.052 4.417,1.052 4.583,1.052 true 3.313,1.76 2.813,1.844 2.813,1.844 2.646,1.844 true 2.427,1.563 2.927,1.563 true 1.188,1.719 2.625,1.906 1.438,0.188 10 false Inverter Current Sensor 2.083,0.563 3.219,0.833 1.135,0.271 10 false Generator/Motor 4.625,0.948 6.24,1.146 1.615,0.198 10 false Inverter Current Sensor 0.969,1.448 2.417,1.646 1.448,0.198 10 false Inverter Current Sensor 5.167,1.469 6.083,1.667 0.917,0.198 10 false MG ECU 3.281,0.396 3.438,0.594 0.156,0.198 10 false U 2.958,0.99 3.115,1.188 0.156,0.198 10 false V 3.802,1 3.958,1.198 0.156,0.198 10 false W 2.667,3.813 3.583,4.01 0.917,0.198 10 false Inverter 0.052,4.177 7.156,4.417 7.104,0.24 12 false Characteristics of Inverter Current Sensor: 1.573,4.792 2.031,4.99 0.458,0.198 10 false 4.5 1.583,5.542 2.042,5.74 0.458,0.198 10 false 2.5 1.594,6.313 2.052,6.51 0.458,0.198 10 false 0.5 1.969,6.635 2.427,6.833 0.458,0.198 10 false -200 4.083,6.635 4.542,6.833 0.458,0.198 10 false 0 6,6.635 6.458,6.833 0.458,0.198 10 false 200 1.542,6.635 2,6.833 0.458,0.198 10 false MG1 1.542,6.885 2,7.083 0.458,0.198 10 false MG2 1.969,6.885 2.427,7.083 0.458,0.198 10 false -375 6,6.885 6.458,7.083 0.458,0.198 10 false 375 0.531,5.313 1.458,5.667 0.927,0.354 10 false Sensor Output Voltage (V) 3.813,7.302 5.5,7.5 1.688,0.198 10 false Current (A)