CONSTRUCTION
The HV battery mainly consists of the HV battery (2 battery stacks), No. 1 and No. 2 HV battery voltage detection wire, No. 1 traction battery device box assembly, battery cooling blower assembly, battery ECU assembly and service plug grip.
The HV battery has achieved high power density, lightweight construction, and longevity at a high level.
The battery cooling blower assembly is used as a dedicated cooling system to ensure that the HV battery performs properly, despite it generating significant heat during the repetitive charge and discharge cycles.
A service plug grip is provided to cut off the high voltage circuit, ensuring safety during maintenance work.
| *1 | No. 2 HV Battery Voltage Detection Wire | *2 | Battery Cooling Blower Assembly |
| *3 | No. 1 Traction Battery Device Box Assembly | *4 | Service Plug Grip |
| *5 | HV Battery Stack | *6 | No. 1 HV Battery Voltage Detection Wire |
| *7 | Battery ECU Assembly | - | - |
Compact, lightweight 3.7 V lithium-ion battery cells are used in order to generate high power output.
| *1 | Positive Terminal | *2 | Negative Terminal |
The 24 lithium-ion battery cells provided for each HV battery stack are connected in series in a bus bar module.
The HV battery consists of 2 HV battery stacks. They are connected to each other in series through bus bar modules and wiring harness.
No. 1 HV Battery Voltage Detection Wire and No. 2 HV Battery Voltage Detection Wire
The No. 1 and No. 2 HV battery voltage detection wires detect the voltage in each cell, and input the voltage to the battery ECU assembly.
3 thermistor type battery temperature sensors are provided in each the HV battery detection wires.
The thermistor type intake air temperature sensors is provided in No. 1 HV battery voltage detection wire to detect the temperature of the cooling air.
The battery ECU assembly optimally controls the cooling system so that the HV battery temperature can be within a specified range according to the temperature information.
| *1 | No. 2 HV Battery Voltage Detection Wire | *2 | No. 1 HV Battery Voltage Detection Wire |
| *a | HV Battery Temperature Sensor | *b | HV Battery Intake Air Temperature Sensor |