Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
NM36W0E _51 Engine / Hybrid System _088520 HYBRID / BATTERY CONTROL _0421729 HYBRID BATTERY SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  DETAILS  HV BATTERY JUNCTION BLOCK  


CONSTRUCTION


a.

The No. 1 traction battery device box assembly consists of the System Main Relays (SMRs), precharge resistor and battery current sensor.


b.

The SMRs are relays that connect and disconnect the HV battery and power cable (HV floor under wire) in accordance with the signal from the hybrid vehicle control ECU. 3 relays are provided; SMRB for the battery positive (+) side, SMRG for the battery negative (-) side, and SMRP for pre-charging.

W145122C01
4.281,1.333 4.094,0.865 4.094,0.865 3.906,0.865 true 4.719,1.073 4.531,0.604 4.531,0.604 4.344,0.604 true 5.219,1.073 4.948,0.417 4.948,0.417 4.76,0.417 true 5.438,0.833 5.823,0.427 5.823,0.427 6.01,0.427 true 4.49,1.927 4.115,2.458 4.115,2.458 3.927,2.458 true 3.469,0.313 3.781,0.469 0.313,0.156 10 false *1 3.708,0.792 4.021,0.948 0.313,0.156 10 false *2 4.146,0.531 4.458,0.688 0.313,0.156 10 false *3 6.073,0.333 6.385,0.49 0.313,0.156 10 false *4 3.75,2.375 4.063,2.531 0.313,0.156 10 false *a 4.573,0.313 4.885,0.469 0.313,0.156 10 false *b
*1 No. 1 Traction Battery Device Box Assembly *2 SMRB
*3 SMRP *4 SMRG
*a Battery Current Sensor *b Precharge Resistor



c.

A battery current sensor, which is built into the No. 1 traction battery device box assembly, is used to detect the HV battery charging and discharging amperage.


d.

The hybrid vehicle control ECU optimally controls the hybrid system so that the SOC of the HV battery can always be within a specified range according to the amperage information that is received via the battery ECU assembly.