Home › Engine / Hybrid System › M15A-FKS (ENGINE MECHANICAL) › ENGINE UNIT
NM36W0E _51 Engine / Hybrid System _088517 M15A-FKS ENGINE MECHANICAL _0421731 ENGINE UNIT DE DETAILS F

M15A-FKS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-iW CONTROLLER  


CONSTRUCTION


a.

A 3-blade vane type VVT-iW controller (camshaft timing gear assembly) is used on the intake side.


b.

2 lock pins are used to lock the vane during the intermediate phase of the VVT-iW operation range.


c.

An assist spring, which assists torque in the advanced direction, is used so that the vane returns to the intermediate phase in response the intake camshaft sub-assembly torque fluctuations to securely connect the 2 lock pins. As a result, engine startability is ensured when starting the engine (when cranking) after the engine was stopped in the retarded operation state.


d.

An oil control valve is built into the camshaft timing gear bolt, which secures the vane to the intake camshaft sub-assembly. As a result, the controlled oil passage is shortened to improve response performance and operation at low temperatures. The oil control valve switches the oil passage when pressed by the cam timing oil control solenoid assembly. Oil passage switching is controlled to continuously change the intake camshaft sub-assembly phase.


e.

The oil control valve has a structure which allows independent control of when the 2 lock pins are connected and released, separate from the advance control and retard control. As a result, a lock operation can be performed during the intermediate phase of the VVT-iW operation range.

VVT-iW Controller (Camshaft Timing Gear Assembly)
W145084C01
0.521,2.708 0.417,2.406 0.417,2.406 0.271,2.406 true 1.833,2 1.76,1.823 1.76,1.823 1.656,1.823 true 2.708,1.573 2.708,1.365 true 3.177,1.479 3.177,1.271 true 5.896,1.104 6.365,1.469 6.365,1.469 5.49,1.01 true 3.083,1.729 3.781,2.49 3.781,2.49 3.615,1.76 true 4.583,0.969 4.521,0.74 4.521,0.74 4.406,0.74 true 5.542,0.698 5.479,0.469 5.479,0.469 5.365,0.469 true 6.469,0.708 6.406,0.479 6.406,0.479 6.292,0.479 true 0.094,2.333 0.406,2.49 0.313,0.156 10 false *1 1.448,1.75 1.76,1.906 0.313,0.156 10 false *2 2.625,1.188 2.844,1.354 0.219,0.167 10 false *3 3.104,1.125 3.417,1.281 0.313,0.156 10 false *4 3.75,2.521 4.063,2.677 0.313,0.156 10 false *5 4.208,0.667 4.521,0.823 0.313,0.156 10 false *6 5.167,0.385 5.479,0.542 0.313,0.156 10 false *7 6.083,0.396 6.396,0.552 0.313,0.156 10 false *8 6.417,1.438 6.729,1.594 0.313,0.156 10 false *a
*1 Camshaft Timing Gear Bolt *2 Assist Spring
*3 Camshaft Timing Gear Cover FR *4 Vane (Fixed on Intake Camshaft Sub-assembly)
*5 Lock Pin *6 Housing (Sprocket)
*7 Camshaft Timing Gear Cover RR *8 Intake Camshaft Sub-assembly
*a Ratchet Groove - -


Lock Pin
W122779C01
2.302,0.51 2.229,0.271 true 3.01,1.292 2.938,1.052 true 5.938,1.281 5.865,1.042 true 5.521,0.427 5.354,0.323 true 2.146,0.104 2.458,0.26 0.313,0.156 10 false *1 2.958,1.302 3.271,1.458 0.313,0.156 10 false *2 2.104,1.5 2.417,1.656 0.313,0.156 10 false *a 5.042,1.5 5.354,1.656 0.313,0.156 10 false *b 5.177,0.208 5.49,0.365 0.313,0.156 10 false *c 5.885,1.281 6.198,1.438 0.313,0.156 10 false *d
*1 Outer Pin *2 Inner Pin
*a Lock Pin Connected *b Lock Pin Released
*c Engine Oil *d Ratchet Groove


Camshaft Timing Gear Bolt (Built into Oil Control Valve)
W133458C01
2.76,1.438 1.906,0.563 true 1.719,0.406 2.031,0.563 0.313,0.156 10 false *1 1.656,2.177 1.969,2.333 0.313,0.156 10 false *a 2.646,0.438 2.958,0.594 0.313,0.156 10 false *b 3.281,0.375 3.594,0.531 0.313,0.156 10 false *c 4.26,0.385 4.573,0.542 0.313,0.156 10 false *d 4.219,2.167 4.531,2.323 0.313,0.156 10 false *e 3.146,2.208 3.458,2.365 0.313,0.156 10 false *d 6.135,1.615 6.448,1.771 0.313,0.156 10 false *a
*1 Oil Control Valve - -
*a Drain *b To Advance Side Vane Chamber
*c To Retard Side Vane Chamber *d Engine Oil
*e To Lock Pin - -




OPERATION


a.

Advance

i.

The cam timing oil control solenoid assembly operates according to the advance signal from the ECM. When the oil control valve reaches the position shown in the following illustration, the advance side vane chamber of the VVT-iW controller (camshaft timing gear assembly) is affected by oil pressure and the vane inside the VVT-iW controller (camshaft timing gear assembly) rotates in the advanced direction. The intake camshaft sub-assembly fixed to the vane also rotates to the advanced side.

W145085C01
2.396,1.188 2.771,0.75 true 0.896,1.708 0.594,0.719 0.594,0.719 0.406,0.719 true 4.563,1.604 4.115,0.479 4.115,0.479 3.948,0.479 true 4.344,1.813 4.719,3.417 4.719,3.417 4.896,3.417 true 5.646,0.479 5.458,0.479 5.458,0.479 4.99,1.594 true 6.615,2.677 6.417,2.677 6.417,2.677 5.542,1.802 true 6.104,2.802 5.969,2.802 5.969,2.802 5.802,2.229 true 3.75,1.135 3.635,0.875 3.635,0.875 3.479,0.875 true 0.844,3.427 1.094,3.427 1.094,3.427 1.563,2.563 true 2.917,3.396 2.76,3.396 2.76,3.396 2.375,2.49 true 0.208,0.646 0.521,0.802 0.313,0.156 10 false *1 3.604,3.615 3.917,3.771 0.313,0.156 10 false *2 2.781,0.583 3.094,0.74 0.313,0.156 10 false *a 3.781,0.396 4.094,0.552 0.313,0.156 10 false *d 5.708,0.385 6.021,0.542 0.313,0.156 10 false *e 6.135,2.708 6.448,2.865 0.313,0.156 10 false *g 3.292,0.802 3.604,0.958 0.313,0.156 10 false *3 0.667,3.344 0.979,3.5 0.313,0.156 10 false *b 2.979,3.302 3.292,3.458 0.313,0.156 10 false *c 4.958,3.333 5.271,3.49 0.313,0.156 10 false *f 6.677,2.583 6.99,2.74 0.313,0.156 10 false *f
*1 Vane *2 ECM
*3 Cam Timing Oil Control Solenoid Assembly - -
*a Rotation Direction *b Retard Side Vane Chamber
*c Advance Side Vane Chamber *d To Advance Side Vane Chamber
*e From Retard Side Vane Chamber *f Drain
*g Oil Pressure - -




b.

Retard

i.

The cam timing oil control solenoid assembly operates according to the retard signal from the ECM. When the oil control valve reaches the position shown in the following illustration, the retard side vane chamber of the VVT-iW controller (camshaft timing gear assembly) is affected by oil pressure and the vane inside the VVT-iW controller (camshaft timing gear assembly) rotates in the retarded direction. The intake camshaft sub-assembly fixed to the vane also rotates to the retarded side.

W145086C01
1.802,0.906 2.104,0.281 2.104,0.281 2.302,0.281 true 1.521,1.073 1.26,0.313 1.26,0.313 1.073,0.313 true 4.563,1.604 4.115,0.479 4.115,0.479 3.948,0.479 true 5.646,0.479 5.458,0.479 5.458,0.479 4.99,1.594 true 6.698,2.688 6.5,2.688 6.5,2.688 5.625,1.813 true 6.104,2.802 5.969,2.802 5.969,2.802 5.802,2.229 true 3.75,1.135 3.635,0.875 3.635,0.875 3.479,0.875 true 0.896,3.521 1.146,3.521 1.146,3.521 1.615,2.656 true 3.094,2.688 2.938,2.688 2.938,2.688 2.688,2.156 true 4.531,1.802 4.24,3.354 4.24,3.354 4.073,3.354 true 0.896,0.25 1.208,0.406 0.313,0.156 10 false *1 3.604,3.615 3.917,3.771 0.313,0.156 10 false *2 2.354,0.177 2.667,0.333 0.313,0.156 10 false *a 3.781,0.396 4.094,0.552 0.313,0.156 10 false *d 5.708,0.385 6.021,0.542 0.313,0.156 10 false *e 6.135,2.708 6.448,2.865 0.313,0.156 10 false *g 3.292,0.802 3.604,0.958 0.313,0.156 10 false *3 0.708,3.438 1.021,3.594 0.313,0.156 10 false *b 3.156,2.615 3.469,2.771 0.313,0.156 10 false *c 3.917,3.292 4.229,3.448 0.313,0.156 10 false *f 6.76,2.604 7.073,2.76 0.313,0.156 10 false *f
*1 Vane *2 ECM
*3 Cam Timing Oil Control Solenoid Assembly - -
*a Rotation Direction *b Retard Side Vane Chamber
*c Advance Side Vane Chamber *d From Advance Side Vane Chamber
*e To Retard Side Vane Chamber *f Drain
*g Oil Pressure - -




c.

Hold

i.

The ECM calculates the target advanced angle according to driving conditions and performs control. After setting the target timing, timings are maintained by the neutral oil control valve as long as driving conditions do not change. As a result, unnecessary engine oil discharge is suppressed while valve timings are aligned to the desired target position.