CONSTRUCTION
A lightweight and high-strength aluminum die-cast stiffening crankcase assembly is used. This assembly is integrated with the cylinder block sub-assembly, thus improving the rigidity of the join with the transaxle, and reducing vibration and noise transmitted to the interior of the vehicle cabin.
Oil drain passages are provided in the stiffening crankcase assembly. This prevents the crankshaft from churning the engine oil, reducing rotational resistance.
The high pressure oil passage, rear oil seal retainer, oil filter bracket and rear end plate are integrated with the stiffening crankcase assembly, thus reducing weight of the engine and making it compact. Also, a rib is provided on the lower portion of the oil filter to prevent oil from spray when replacing the oil filter.
The left and right vertical walls inside the crankcase are given a connected structure to prevent oil agitation and improve rigidity.
| *1 | Stiffening Crankcase Assembly | *2 | Oil Pan Sub-assembly |
| *a | Oil Passage | *b | Oil Drain Passage |
| *c | Oil Filter Bracket | *d | Rib |
| *e | Rear End Plate | *f | Rear Oil Seal Retainer |