CONSTRUCTION
The shape of the crankshaft has been optimized to bring it to a state of total balance without adding a counterweight to the No. 2 cylinder pin, reducing the weight while achieving reliability and quietness.
The crankshaft has 4 main bearing journals and 4 balance weights.
| *a | No. 1 Main Bearing Journal | *b | No. 2 Main Bearing Journal |
| *c | No. 3 Main Bearing Journal | *d | No. 4 Main Bearing Journal |
| *e | Balance Weight | - | - |
The oil groove on the crankshaft bearing is made eccentric to reduce the amount of oil leakage from the bearing. This enables the capacity of the oil pump to be reduced in order to reduce parasitic losses.
Resin coated aluminum crankshaft bearings are used for the crankshaft bearings.
Lead-free materials have been used for the crankshaft and crankshaft bearing in consideration of environmental issues.
| *1 | Upper Main Bearing (Crankshaft Bearing) | *2 | Lower Main Bearing (Crankshaft Bearing) |
| *3 | Upper Crankshaft Thrust Washer | - | - |
| *a | Oil Groove | *b | Center |
| *c | Edge | *d | Oil Groove Depth |
|
Resin Coating | - | - |