Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for HV Model)
NM36W0E _58 Vehicle Interior _088538 THEFT DETERRENT / KEYLESS ENTRY _0421780 ENTRY AND START SYSTEM(for HV Model) DE DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for HV Model)  DETAILS  CERTIFICATION ECU  


CONSTRUCTION


a.

The certification ECU includes the IGP relay and IGR relay actuation circuits, CPU and hold circuit.


b.

The hold circuit is provided to prevent the power supply to the relays from being cut off when an abnormality occurs in the IGP relay and/or IGR relay actuation circuits while driving.

Y259667E01
0.927,1.594 1.281,1.781 0.354,0.188 10 false CPU 2.063,0.771 3.563,1.156 1.5,0.385 10 false IG1/IG2 Relay Actuation Circuit 2.49,2.24 3.281,2.521 0.792,0.281 10 false Hold Circuit 5.604,1.24 6.302,1.51 0.698,0.271 10 false IG1 Relay 5.615,2.823 6.313,3.094 0.698,0.271 10 false IG2 Relay 1.385,3.271 4.323,3.531 2.938,0.26 10 false Certification ECU (Smart Key ECU Assembly)

HINT:

The certification ECU constantly stores the present power source mode in its memory. Therefore, if the power to the certification ECU is interrupted due to the removal of the auxiliary battery, the certification ECU restores the power source after the auxiliary battery is reconnected. For this reason, if the auxiliary battery is removed when the power source is in a mode other than off, the power will be restored to the vehicle at the same time the power is restored to the certification ECU by reconnecting the auxiliary battery. Therefore, before removing the auxiliary battery, be sure to turn the power source off.