Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM › 2020.03–2020.07
NM36W0E _58 Vehicle Interior _088538 THEFT DETERRENT / KEYLESS ENTRY _0421782 IMMOBILISER SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The immobiliser system compares the ID code registered in the transponder key ECU assembly with the ID code of the transponder chip embedded in the ignition key. The system is unset if these ID codes match. Therefore, the transponder key ECU assembly and the ECM communicate with each other to authorize fuel injection and ignition, enabling the engine to start.


b.

The content applies to models without the smart entry and start system. For details of models with the smart entry and start system, see the Immobiliser Function in Smart Entry and Start System.

HINT:

When replacing the transponder key ECU assembly or making a new ignition key, key recognition code(s) must be registered. For details of the recognition code registration procedure, refer to the Service Bulletin.