FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Models with headup display *2: Gasoline models *3: Models with CVT *4: Models with manual transaxle *5: HV models |
|
| Radio and Display Receiver Assembly | ·
Outputs the audio signal of the selected audio source to the speakers. ·
Sends each sound source and hands-free system status to the combination meter. ·
Using the equipped 2.4GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router. |
| Speakers | Output the audio sounds. |
| Roof Antenna Assembly
·
AM ·
FM |
Receives AM/FM radio broadcasts via the roof antenna assembly. |
| Window Glass Antenna Wire (Rear)
·
DAB |
Receives radio broadcasting signals (DAB). |
| Digital Audio Broadcasting Antenna Assembly | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. |
| Steering Pad Switch Assembly | Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly. |
| Telephone Microphone Assembly | ·
Detects voice during hands-free conversations and voice commands. ·
Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly. |
| No. 1 Stereo Jack Adapter Assembly | ·
When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB. |
| Combination Meter Assembly | ·
Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication. ·
Sends the vehicle speed signal to the radio and display receiver assembly. |
| Meter Mirror Sub-assembly*1 | Displays various information on the head up display sent from the radio and display receiver assembly via local bus communication. |
| Navigation Antenna Assembly
·
GPS Antenna |
Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly. |
| Park/Neutral Position Switch Assembly*2*3 | Sends an R shift position signal to the radio and display receiver assembly. |
| Back-up Light Switch Assembly*4 | |
| Power Distribution Box Assembly*5 | |
| Hybrid Vehicle Control ECU*5 | Sends an R shift position signal to the power distribution box assembly. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.