Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2020.03–2020.07
NM36W0E _59 Vehicle Exterior _088687 EXTERIOR PANELS / TRIM _0422149 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  BODY SHELL  


CONSTRUCTION


a.

Body Shell

i.

By optimizing the layout of the body frame members, optimizing the joining method and configuring reinforcing material, the body structure is lightweight and highly rigid, enhancing excellent handling stability.


ii.

The closed cross-section construction of the suspension tower brace and outer cowl top panel sub-assembly main body provides enhanced rigidity of frame connections, helps realizing excellent handling stability.

Outer Cowl Top Panel Sub-assembly (This illustration is an example only.)
Y259057C01
3.083,1.833 3.833,0.583 3.833,0.583 4,0.583 true 3.552,5.031 3.75,4.5 3.75,4.5 4.833,4.583 true 4.073,0.5 4.385,0.656 0.313,0.156 10 false *1 4.375,1.344 4.531,1.5 0.156,0.156 10 false A 3.667,5.333 3.979,5.49 0.313,0.156 10 false *a 3.667,4.333 3.979,4.49 0.313,0.156 10 false *b 4.083,2.385 4.24,2.542 0.156,0.156 10 false A
*1 Outer Cowl Top Panel Sub-assembly - -
*a A - A Cross Section *b Closed Cross-sections



iii.

The flat ring shape of the closed cross-section portions of the instrument panel reinforcement assembly and outer cowl top panel sub-assembly provide excellent steering rigidity.

Y259058C02
5.146,1.917 6.063,2.833 6.063,2.833 6.229,2.833 true 2.552,0.802 2.719,0.802 2.719,0.802 3.635,1.719 true 2.354,0.719 2.667,0.875 0.313,0.156 10 false *1 6.302,2.75 6.615,2.906 0.313,0.156 10 false *2
*1 Outer Cowl Top Panel Sub-assembly *2 Instrument Panel Reinforcement Assembly




b.

Side Body

i.

The side member outer reinforcement is rigidly connected and forms an annular structure, enhancing the rigidity of the body frame joints.

·

The frame joining was enhanced by adding top plate surface spot welds and flange spot welds to the front body pillar and rail.

·

By increasing the number of spot welds, including spot welds from an overhead view, the joining rigidity of the frame was enhanced.

·

The width of the lower joint of each pillar was expanded in the front-back direction.

·

By increasing the number of spot welds, including the spot welds in planar view, the joining rigidity of the frame was enhanced.

Side Body (This illustration is an example only.)
Y259059C02
4.167,1.333 4.417,1.75 4.417,1.75 4.583,1.75 true 4.896,6.573 5.25,7.167 5.25,7.167 5.417,7.167 true 1.5,6.667 1.75,7.083 1.75,7.083 1.917,7.083 true 4.656,1.667 4.969,1.823 0.313,0.156 10 false *1 1.99,7 2.302,7.156 0.313,0.156 10 false *2 5.49,7.083 5.802,7.24 0.313,0.156 10 false *3 0.396,7.448 0.708,7.604 0.313,0.156 10 false : *a
*1 Roof Side Rail *2 Rocker Panel
*3 Center Body Pillar - -
*a Bond Dot - -





c.

Ring Structure

·

The rear body uses an annular structure comprising the No. 2 rear floor cross member reinforcement and quarter wheel house inner panel sub-assemblies to ensure excellent torsional rigidity.

Ring Structure (This illustration is an example only.)
Y259060C02
0.583,3.917 0.75,3.917 0.75,3.917 1.583,2.25 true 4.417,4.25 4.25,4.25 4.25,4.25 3.417,2.583 true 6.5,3.75 6.333,3.75 6.333,3.75 5.25,1.583 true 6.573,3.667 6.885,3.823 0.313,0.156 10 false *1 4.49,4.167 4.802,4.323 0.313,0.156 10 false *2 0.365,3.833 0.677,3.99 0.313,0.156 10 false *3
*1 Quarter Wheel House Inner Panel Sub-assembly RH *2 No. 2 Rear Floor Cross Member Reinforcement
*3 Quarter Wheel House Inner Panel Sub-assembly LH - -




d.

Excellent torsional rigidity is enhanced by connecting the reinforcements at the back door opening with ridge lines to form an annular structure.

Back Door Opening Ring Structure (This illustration is an example only.)
Y259061


e.

High-rigidity Urethane Sealant

i.

Body rigidity is achieved by using a high-rigidity urethane sealant for bonding windshield glass.

High-rigidity Urethane Sealant (This illustration is an example only.)
Y259062C02
4.25,4 4.5,3.583 4.5,3.583 4.667,3.583 true 4.375,4.698 4.625,5.115 4.625,5.115 4.792,5.115 true 2.333,3.417 2.5,3.417 2.5,3.417 2.75,3.833 true 4.74,3.5 5.052,3.656 0.313,0.156 10 false *1 2.115,3.333 2.427,3.49 0.313,0.156 10 false *2 3.51,5.292 3.823,5.448 0.313,0.156 10 false *a 4.865,5.031 5.177,5.188 0.313,0.156 10 false *b 2.25,0.844 2.563,1 0.313,0.156 10 false A 1.635,0.667 1.948,0.823 0.313,0.156 10 false A
*1 Windshield Glass *2 Front Body Side Panel
*a A - A Cross Section *b High-rigidity Urethane Sealant




f.

Front Side Member Reinforcement RR

·

The torsional rigidity and steering stability of the body have been enhanced by increasing the lap amount of the frame member to enhance the bond formation.

Front Side Member Reinforcement RR (This illustration is an example only.)
Y259063C02
3,3.333 3.167,3.333 3.167,3.333 3.667,2.5 true 4.552,4.167 4.865,4.323 0.313,0.156 10 false *a 2.802,3.25 3.01,3.417 0.208,0.167 10 false *1
*1 Center Cross Member Sub-assembly - -
*a Lap - -




g.

Center Floor Cross Member Sub-assembly

·

By increasing the height of the rear end of the tunnel and combining it with the center floor cross member sub-assembly, the body rigidity and steering stability were enhanced.

Center Floor Cross Member Sub-assembly (This illustration is an example only.)
Y259065C02
4.583,1.917 5.75,1.333 5.75,1.333 5.917,1.333 true 4.333,2.542 5.333,4.208 5.333,4.208 5.5,4.208 true 5.99,1.25 6.302,1.406 0.313,0.156 10 false *1 5.573,4.115 5.885,4.271 0.313,0.156 10 false *a
*1 Center Floor Cross Member Sub-assembly - -
*a Tunnel Rear End - -




h.

Rear Side Member Sub-assembly

·

By changing the way the rear side member sub-assembly is combined with the rocker panel and center floor cross member sub-assembly, the torsional rigidity and handling stability of the body are enhanced by enhancing the coupling rigidity.

Rear Side Member Sub-assembly (This illustration is an example only.)
Y259066C02
0.75,4.417 0.917,4.417 0.917,4.417 1.417,3.583 true 1.458,4.542 1.625,4.542 1.625,4.542 2.292,2.208 true 2.75,2.917 3.5,4.167 3.5,4.167 3.667,4.167 true 0.583,4.333 0.896,4.49 0.313,0.156 10 false *1 1.26,4.458 1.573,4.615 0.313,0.156 10 false *2 3.74,4.083 4.052,4.24 0.313,0.156 10 false *3
*1 Center Floor Cross Member Sub-assembly *2 Rear Side Member Sub-assembly
*3 Rocker Panel - -



i.

Strainer

·

By adopting a strainer in the rear wheel house and suppressing the inward sag of the rear wheel house, the torsional rigidity and steering stability of the body were enhanced.

Strainer (This illustration is an example only.)
Y259067C02
2.25,0.417 2.417,0.417 2.417,0.417 3.333,1.667 true 2.083,0.333 2.396,0.49 0.313,0.156 10 false *1
*1 Strainer - -





i.

Structural Adhesive

·

By using structural adhesive over a wide range of areas such as the floor panels, side doors and back door opening, the joint rigidity between parts has been increased, and steering stability and ride comfort have been enhanced.

Y259064C02
0.625,4.219 0.938,4.375 0.313,0.156 10 false : *a
*a Structural Adhesive - -