Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2020.03–2020.07
NM36W0E _59 Vehicle Exterior _088687 EXTERIOR PANELS / TRIM _0422149 BODY STRUCTURE GE GENERAL F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  GENERAL  GENERAL  


OUTLINE


a.

Lightweight and Highly Rigid Body

i.

High-strength steel, ultra high-strength steel and hot-stamped steel are used in order to achieve excellent body rigidity and a lightweight body.



b.

Rust-resistant Body

i.

Rust-resistant performance is enhanced by the extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment that includes the application of anti-rust wax, sealer and anti-chipping paint to the easily corroded parts such as the hood and rocker.



c.

Safety Features

i.

The impact absorbing structure helps minimize cabin deformation by effectively helping to absorb the impact energy in the event of a front, side or rear collision. Helps provide high performance occupant protection.



d.

Aerodynamics

i.

Various types of airflow routing parts that control airflow are provided under the floor, and an undercover is provided to make the under-floor area flat in order to enhance excellent aerodynamic performance.



e.

Low Vibration and Low Noise Body

i.

Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.




MAIN FEATURES


a.

Exterior Design Theme

i.

B-Dash

·

The exterior design was conceptualized as a fusion of multiple key aspects: "Bold", "Brisk", "Boost", "Beauty", and dashing like a "Bullet", achieving an expression of condensed power that seems ready to spring into action at any moment.

·

The condensed cabin, formed by shaving away any unnecessary bits, and its sculpted form directed toward the tires, expresses a style and design giving a premonition of active driving.




b.

Front Design

i.

The strength of the front mask is expressed through a sense of motion pushing out forward from the entirety of the compressed body toward the large grille that merges the upper and lower body.

Y259077


ii.

The three-dimensional sculpting extending from the side rocker panel molding to the bumper corner and the grille emphasizes the low-center-of-gravity posture and the excellent stance, while also conferring agility via the T-shaped grille opening.

Y259078


iii.

Headlight

·

The model equipped with LED headlights expresses a vibrant look by using a light guide light that integrates the functions of LED trinocular reflectors and daytime running lights and turn signal lights into a sharp outer shape.

·

Halogen headlight-equipped vehicles are based around single-lens projectors that integrate low and high beams, with other lights positioned to keep a minimal vertical dimension.

Headlight Assembly (This illustration is an example only.)
Y259079C02
0.198,0.25 0.583,0.542 0.385,0.292 12 false *A: 3.667,0.25 4.031,0.51 0.365,0.26 12 false *B:
*A Models with LED Type Headlight *B Models with Halogen Type Headlight





c.

Side Design

i.

The forward leaning posture of the cabin (A in illustration) combined with the movement of the under body (B in illustration) that flows forward from the rear flare to the headlight, expresses a vibrant energy that seems ready to spring into action at any moment.

Y259080N02
3.25,1.917 4,0.667 4,0.667 4.167,0.667 true 3.333,4 3.167,4 3.167,4 2.167,2.333 true 4.25,0.583 4.406,0.781 0.156,0.198 10 false A 3.406,3.917 3.563,4.115 0.156,0.198 10 false B


ii.

The rear flare (A in illustration) emphasizes active driving by expressing agility with a wedge-shaped movement that traces a curve.


iii.

The rocker panel molding (B in illustration), which is standard equipment, expresses a low-center-of-gravity posture.

Y259081N02
4.458,4.104 4.292,4.104 4.292,4.104 3.792,3.271 true 5.75,2.167 6.25,1.333 6.25,1.333 6.417,1.333 true 6.49,1.25 6.646,1.448 0.156,0.198 10 false A 4.531,4.021 4.688,4.219 0.156,0.198 10 false B



d.

Rear Design

i.

The upper body (A in illustration) with a unique structure that combines the back window and rear combination lights in a single graphic, and the bumper that supports it, expresses the excellent stance with a shape that emphasizes the overhang of the tire. (B in illustration)

Y259082N02
1.917,1.083 1.417,0.25 1.417,0.25 1.25,0.25 true 5.583,2.917 6.083,2.083 6.083,2.083 6.25,2.083 true 1.542,2.917 1.042,2.083 1.042,2.083 0.875,2.083 true 1.094,0.167 1.25,0.365 0.156,0.198 10 false A 6.323,2 6.479,2.198 0.156,0.198 10 false B 0.719,2 0.875,2.198 0.156,0.198 10 false B

·

A slim back-up light (A in illustration) and a reflex reflector assembly (B in illustration) are placed on the large trapezoidal garnish at the bottom of the bumper.

·

The lower area is visually tightened up by blackout styling, and the movement toward the tire is further emphasized to enhance sportiness. (C in illustration)

Y259083N02
1.042,4.333 1.208,4.333 1.208,4.333 1.458,3.917 true 4.5,4.083 4.667,4.083 4.667,4.083 5.167,3.25 true 2.604,4.083 2.438,4.083 2.438,4.083 1.938,3.25 true 3.938,4 3.771,4 3.771,4 3.417,3.417 true 5.667,3.917 5.917,4.333 5.917,4.333 6.083,4.333 true 4.021,3.917 4.177,4.115 0.156,0.198 10 false A 2.677,4 2.833,4.198 0.156,0.198 10 false B 0.875,4.25 1.031,4.448 0.156,0.198 10 false C 4.344,4 4.5,4.198 0.156,0.198 10 false B 6.156,4.25 6.313,4.448 0.156,0.198 10 false C



ii.

Rear Combination Light

·

The rear combination lights of the model equipped with LED headlights have a side lens and tail light graphic that has the same features as the headlights.

·

The rear combination lights for cars without LED headlights have a concentric lens graphic so that the light performance can be optimized while maintaining the same characteristics as headlights of the same grade.

Rear Combination Light (This illustration is an example only.)
Y259084C02
0.198,0.25 0.583,0.542 0.385,0.292 12 false *A: 3.667,0.25 4.031,0.51 0.365,0.26 12 false *B:
*A Models with LED Type Headlight *B Models without LED Type Headlight