Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2020.03–2020.07
NM36W0E _59 Vehicle Exterior _088687 EXTERIOR PANELS / TRIM _0422149 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SOUND ABSORBING AND VIBRATION DAMPING MATERIAL  


CONSTRUCTION


a.

Sound Absorption and Insulation Structure

i.

Various types of silencers are positioned around the floor panel and engine compartment to greatly suppress vibration and noise that are transmitted into the interior from parts such as the engine and tires, achieving superior quietness. Also, materials such as foamed materials, sound insulation sealant and damping materials are optimally positioned to achieve superior NVH* performance.

HINT:

*: An abbreviation created by taking the first letter of Noise (unpleasant sounds and loud sounds), Vibration (vibrations from the engine and tires) and Harshness (vibrations felt through the steering wheel, seats and floor according to height changes in the road surface, etc.). NVH is used to describe the level of riding comfort and sound quality actually experienced by passengers.




b.

Floor Silencer

i.

The floor silencer (coating-type applied damping materials), which is applied at optimal thickness that varies by the area, is lightweight and provides excellent quietness. These characteristics allow the floor silencer to reduce the amount of road and engine noise that enters the cabin.


ii.

By applying the damping material at varying levels of thickness, optimal damping performance has been achieved.



c.

Sound Absorption and Insulation Structure around Engine Compartment

i.

By adopting a fender separator, hood insulator, outer dash panel insulator and engine under cover center, the coverage area of sounds absorbing and insulating material has been increased, achieving a high level of noise reduction.

Insulator and Fender Liner (This illustration is an example only.)
Y259068C02
5.667,3.333 5.917,2.917 5.917,2.917 6.083,2.917 true 2.083,3.667 2.25,3.667 2.25,3.667 2.5,3.25 true 0.75,2.167 0.917,2.167 0.917,2.167 1.417,1.667 true 0.74,0.344 0.906,0.344 0.906,0.344 1.563,0.896 true 0.542,0.26 0.854,0.417 0.313,0.156 10 false *1 6.156,2.833 6.469,2.99 0.313,0.156 10 false *2 1.865,3.583 2.177,3.74 0.313,0.156 10 false *3 0.531,2.083 0.844,2.24 0.313,0.156 10 false *4 5.458,4.25 5.771,4.406 0.313,0.156 10 false *a 3.729,1.031 3.885,1.188 0.156,0.156 10 false A 4.344,1.948 4.5,2.104 0.156,0.156 10 false A
*1 Outer Dash Panel Insulator *2 Fender Separator
*3 Engine Under Cover Center *4 Hood Insulator
*a A - A Cross Section - -



ii.

By configuring foam material on the front body pillar, center body pillar, rear body pillar and front header panel, the amount of engine noise and road noise entering the cabin were reduced.

Front Body Pillar / Front Header Panel (This illustration is an example only.)
Y259069C02
3.667,1.25 3.833,1.25 3.833,1.25 4.083,0.833 true 6.417,2.5 6.667,2.917 6.667,2.917 6.833,2.917 true 3.667,2.833 3.833,2.833 3.833,2.833 4.083,2.417 true 4.25,3.542 4.5,3.125 4.5,3.125 4.667,3.125 true 5.75,3.458 5.917,3.458 5.917,3.458 6.167,3.875 true 6.333,0.583 6.583,1 6.583,1 6.75,1 true 0.167,0.083 0.521,0.365 0.354,0.281 12 false *A: 0.156,2.833 0.5,3.073 0.344,0.24 12 false *B: 3.469,2.76 3.781,2.917 0.313,0.156 10 false *1 4.042,1.417 4.354,1.573 0.313,0.156 10 false *a 5.906,1.417 6.219,1.573 0.313,0.156 10 false *b 4.042,2.854 4.354,3.01 0.313,0.156 10 false *c 5.906,2.844 6.219,3 0.313,0.156 10 false *d 4.042,4.583 4.354,4.74 0.313,0.156 10 false *e 5.906,4.583 6.219,4.74 0.313,0.156 10 false *f 3.469,1.177 3.781,1.333 0.313,0.156 10 false *1 6.823,0.927 7.135,1.083 0.313,0.156 10 false *1 6.896,2.844 7.156,3.052 0.26,0.208 10 false *1 5.552,3.385 5.865,3.542 0.313,0.156 10 false *1 4.74,3.052 5.052,3.208 0.313,0.156 10 false *1 1.115,0.76 1.427,0.917 0.313,0.156 10 false B 0.802,0.385 1.115,0.542 0.313,0.156 10 false A 0.344,1.802 0.656,1.958 0.313,0.156 10 false D 1.135,1.906 1.448,2.063 0.313,0.156 10 false E 1.229,2.833 1.542,2.99 0.313,0.156 10 false F 1.052,0.927 1.365,1.083 0.313,0.156 10 false A 0.948,0.417 1.26,0.573 0.313,0.156 10 false B 1.271,0.26 1.583,0.417 0.313,0.156 10 false C 1.438,0.594 1.75,0.75 0.313,0.156 10 false C 1.135,2.5 1.448,2.656 0.313,0.156 10 false E 1.823,2.833 2.135,2.99 0.313,0.156 10 false F 0.781,1.802 1.094,1.958 0.313,0.156 10 false D
*A Front Body Pillar *B Front Header Panel
*1 Foamed Materials - -
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section


Center Body Pillar / Rear Body Pillar (This illustration is an example only.)
Y259070C02
5.885,1 6.198,1.156 0.313,0.156 10 false *a 5.885,2.208 6.198,2.365 0.313,0.156 10 false *b 5.885,2.948 6.198,3.104 0.313,0.156 10 false *c 5.885,4.25 6.198,4.406 0.313,0.156 10 false *d 3.365,4.5 3.677,4.656 0.313,0.156 10 false *e 1.167,4.417 1.479,4.573 0.313,0.156 10 false *f 1.958,0.677 2.271,0.833 0.313,0.156 10 false A 2.01,1.135 2.323,1.292 0.313,0.156 10 false B 1.646,2.604 1.958,2.76 0.313,0.156 10 false C 3.292,0.635 3.604,0.792 0.313,0.156 10 false D 3.042,1.781 3.354,1.938 0.313,0.156 10 false E 1.333,2.031 1.646,2.188 0.313,0.156 10 false F 2.51,0.698 2.823,0.854 0.313,0.156 10 false A 2.417,1.156 2.729,1.313 0.313,0.156 10 false B 2.354,2.594 2.667,2.75 0.313,0.156 10 false C 1.333,2.458 1.646,2.615 0.313,0.156 10 false F 3.583,2.042 3.896,2.198 0.313,0.156 10 false E 3.979,0.406 4.292,0.563 0.313,0.156 10 false D
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section


·

By optimizing the thickness and mass per unit area of the dash panel insulator assembly, the interaction between the dash panel insulator assembly and the surrounding parts has been reduced as much as possible to improve sound absorption and insulation.

Dash Panel Insulator Assembly (This illustration is an example only.)
Y262281C01
4.76,1.917 5.427,1.083 5.427,1.083 5.594,1.083 true 0.667,1.417 0.833,1.417 0.833,1.417 1.5,2.25 true 2.167,0.479 2.333,0.479 2.333,0.479 2.75,1 true 3.927,2.75 5,4.083 5,4.083 5.167,4.083 true 5.229,3.979 5.542,4.135 0.313,0.156 10 false *1 5.667,0.979 5.979,1.135 0.313,0.156 10 false *2 1.969,0.375 2.281,0.531 0.313,0.156 10 false *3 0.469,1.313 0.781,1.469 0.313,0.156 10 false *2
*1 Dash Panel Insulator Assembly *2 No. 1 Front Panel Side Silencer
*3 Front Panel Silencer - -





d.

Steering Column Hole Cover

·

By optimizing the thickness of the dash panel sub-assembly, the body vibration characteristics were enhanced to reduce road noise and engine noise.

·

A steering column hole cover has been provided to reduce the size of the steering shaft opening and thus reduce the amount of road noise and engine noise transmitted via the steering shaft through hole.

Y259072C02
3.458,1.667 4.208,0.417 4.208,0.417 4.375,0.417 true 1.667,0.583 1.833,0.583 1.833,0.583 2.333,1.417 true 1.469,0.51 1.781,0.667 0.313,0.156 10 false *1 4.448,0.344 4.76,0.5 0.313,0.156 10 false *2
*1 Dash Panel Sub-assembly *2 Steering Column Hole Cover




e.

Rear Wheel House Liner

i.

The rear wheel house liner is set inside the rear wheel house to reduce road noise from the rear wheel house.

Fender Liner (The illustration shown is an example only.)
Y259073C02
3.667,1.417 4.417,0.167 4.417,0.167 4.583,0.167 true 5.333,2.417 5.833,1.583 5.833,1.583 6,1.583 true 4.656,0.083 4.969,0.24 0.313,0.156 10 false *1 6.073,1.5 6.385,1.656 0.313,0.156 10 false *2
*1 Rear Wheel House Liner RH *2 Rear Wheel House Liner LH




f.

Door

i.

By using door seals and resin service hole covers for the front and rear doors, high noise reduction has been achieved.

Front Door Service Hole Cover (This illustration is an example only.)
Y259074C02
4,3.083 5.333,2.333 5.333,2.333 5.5,2.333 true 5.583,2.25 5.896,2.406 0.313,0.156 10 false *1
*1 Front Door Service Hole Cover RH - -




g.

Floor Panel

·

An upper and lower split type has been adopted for the dash panel that was traditionally single-piece integrated type.

·

The hybrid vehicle has a beat shape and coating type damping material on the front floor to improve the body vibration characteristics, thereby reducing road noise.

Front Floor (This illustration is an example only.)
Y259075C02
0.75,4.896 1.063,5.052 0.313,0.156 10 false : *a
*a Coating Type Damping Material - -