FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Brake Booster with Master Cylinder Assembly
·
Skid Control ECU |
Receives various signals and sends an emergency brake signal to combination meter assembly. |
| Speed Sensors | Detect the wheel speed of each of the 4 wheels and sends signals to the skid control ECU. |
| Airbag Sensor Assembly | Sends the acceleration information to the skid control ECU. |
| Stop Light Switch Assembly | Detects the brake pedal depressing signal and sends a signal to the skid control ECU. |
| Combination Meter Assembly | Receives an emergency brake signal and turns on the hazard warning lights. |
| Hazard Warning Signal Switch Assembly | Sends a hazard warning switch on signal to the combination meter assembly. |
SYSTEM CONTROL
The activating and deactivating conditions for the emergency brake signal are as shown in the following table:
| Condition | Details |
|---|---|
| Emergency Brake Signal Operating Conditions | When all of the following conditions are met, the emergency brake signal starts operating:
·
Vehicle speed is above 55 km/h (35 mph). ·
Driver is depressing the brake pedal. ·
Emergency braking is detected from the vehicle deceleration. |
| Emergency Brake Signal Ending Conditions | When any of the following conditions is met, the emergency brake signal stops operating:
·
Driver has released the brake pedal. ·
Emergency braking is no longer detected from the vehicle deceleration. ·
Driver has operated the hazard warning switch. |