OUTLINE
A conventional type starter assembly is used.
A starter control (cranking hold function) is used. Once the engine switch is pushed, this function operates the starter until the engine starts.*
*: Models with entry and start system
SPECIFICATION
| Models without Stop and Start System | Models with Stop and Start System | |
|---|---|---|
|
*1: Length from the mounted area to the rear end of the starter *2: Viewed from pinion side |
||
| Starter Type | TS10 (Conventional) | ESW10 (Conventional) |
| Rating Output | 1.0 kW | 1.0 kW |
| Rating Voltage | 12 V | 12 V |
| Length*1 | 114.8 mm (4.52 in.) | 116.5 mm (4.59 in.) |
| Weight | 3000 g (6.6 lb) | 3300 g (7.3 lb) |
| Rotational Direction*2 | Clockwise | Clockwise |