CONSTRUCTION
The exhaust pipe is made of stainless steel to reduce their weight and improve rust resistance.
TWC is provided at the front of the front exhaust pipe assembly.*
*: Models without GPF System
| *1 | Front Exhaust Pipe Assembly | *2 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | *b | TWC |
| *c | Sub Muffler | *d | Main Muffler |
GPF is provided at the front of the front exhaust pipe assembly.*
*: Models with GPF System
| *1 | Front Exhaust Pipe Assembly | *2 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | *b | GPF |
| *c | Sub Muffler | *d | Main Muffler |
Ball joints are used to join the exhaust manifold to the front exhaust pipe assembly, and the front exhaust pipe assembly to the tail exhaust pipe assembly. As a result, a simple construction and high reliability have been realized.
The vibration from the engine and the resonance vibration of the exhaust pipe are absorbed by the ball joints (flange and gasket spherical surfaces), reducing vibration and noise.
| *1 | Bolt | *2 | Spring |
| *3 | Flange | - | - |
| *a | Exhaust Gas | *b | Oscillation |
| *c | The illustration is a representative example. | - | - |