FUNCTION OF MAIN COMPONENTS
The main components of the EGR system are as follows:
| Components | Function |
|---|---|
| EGR Valve Assembly | Opens and closes based on signals from the ECM and controls the flow rate of the exhaust gas in the EGR bypass. |
| EGR Cooler Assembly | The EGR cooler cools the exhaust gas to improve EGR efficiency. |
| ECM | Based on the signals received from the sensors, the ECM determines the EGR volume in accordance with the engine operating conditions. |
SYSTEM CONTROL
This system is designed to reduce and control NOx formation due to a slight reduction of the peak temperature in the engine combustion chamber and to improve fuel economy, which is accomplished by introducing a small amount of inert gas into the intake passage.
By sensing the engine driving conditions and the actual amount of the EGR valve assembly opening, the ECM operates the EGR valve assembly and throttle control motor to regulate the amount of exhaust gas that is recirculated.
A highly efficient EGR cooler assembly is used to achieve the optimized EGR rate.
The EGR valve assembly regulates the flow volume of some exhaust gas passing through the cylinder head sub-assembly and returns the gas to the intake manifold.