SYSTEM CONTROL
By introducing blowby gas that has a large amount of HC into the air intake side and burning it again, the system attempts to enhance the emission performance. Returning blowby gas volume is regulated to the appropriate amount corresponding to the engine operating conditions, reducing the engine oil quantity taken away and engine idling speeds.
The Positive Crankcase Ventilation (PCV) valve passage returns the blowby gas into the area after the throttle valve in accordance with the intake manifold vacuum.
When load is low, the passage from the cylinder head cover sub-assembly to the area before the throttle valve increases the air purification performance inside the crankcase by introducing fresh air, and when load is high, the passage circulates the blowby gas together with the PCV valve (ventilation valve sub-assembly) side passage due to the intake manifold vacuum.
| *1 | Air Cleaner Assembly | *2 | Intake Manifold |
| *3 | Cylinder Head Cover Sub-assembly | *4 | PCV Valve (Ventilation Valve Sub-assembly) |
| *5 | Crank Case | - | - |
|
Blowby Gas |
|
Fresh Air |