Home › Steering › STEERING COLUMN › STEERING LOCK SYSTEM › from 2020.07
NM36W0E _55 Steering _088382 STEERING COLUMN _0421318 STEERING LOCK SYSTEM CO CONTROL F

STEERING COLUMN  STEERING LOCK SYSTEM  CONTROL  STEERING LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Steering Lock Actuator or Upper Bracket Assembly Steering Lock ECU Receives the steering wheel assembly unlock/lock request signal from the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU), and activates the steering lock motor.
Certification ECU (Smart Key ECU Assembly)
·

Certifies the electrical key transmitter sub-assembly.

·

Sends steering lock motor drive permission signals to the steering lock ECU.

·

Sends steering lock enabling signal output to the steering lock ECU.


ID Code Box (Immobiliser Code ECU) Sends each set/unset request signal to the steering lock ECU.
Combination Meter Assembly Multi-information Display Displays the warning message to inform the driver of a malfunction in the electrical steering lock system.
Buzzer Sounds to warn the driver of a malfunction in the system.


FUNCTION


a.

The steering lock system is integrated in the steering lock ECU, and the ECU controls the lock bar operation in the steering lock actuator or upper bracket assembly through the control of the lock/unlock motor.


b.

The steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this information to the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU).


c.

In this system, the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) determines whether to lock and unlock the steering wheel assembly. Then, the certification ECU (smart key ECU assembly) sends lock or unlock command signals to the steering lock ECU via LIN communication. Upon receiving the signals, the steering lock ECU operates the steering lock motor to lock or unlock the steering.

HINT:

It is not possible to replace only the steering lock ECU in the steering lock actuator or upper bracket assembly. Therefore, if the ECU malfunctions, the entire steering lock actuator or upper bracket assembly must be replaced.