CONSTRUCTION
The spark plug has been located in the center of the combustion chamber in order to achieve high the engine's anti-knocking performance.
The angle of the intake and exhaust valves is narrowed and set at 33.5° to realize a compact cylinder head.
A taper squish combustion chamber is used to achieve high anti-knocking performance and intake efficiency. In addition, excellent engine performance and fuel economy have been realized.
The exhaust port for each cylinder is merged inside the cylinder head sub-assembly to accelerate warm-up of the TWC, thus improving the fuel economy. In addition, at high engine speeds, with the effective cooling of the exhaust gases, the operation range for maintaining stoichiometric air-fuel mixture ratio is widened, thus reducing rich air-fuel mixtures and also improving fuel economy.
By enlarging the merged port diameter of the exhaust port, exhaust gas back-pressure has been reduced, providing greater torque.
The cylinder head bolt employs plastic region tightening bolts.
The routing of the water jacket in the cylinder head is optimized to achieve high cooling performance.
| *1 | Fuel Injector Assembly | *2 | Spark Plug |
| *a | Intake Port | *b | Exhaust Port |
| *c | Exhaust Side | *d | Merged Port |
| *e | EGR Gas Passage | *f | Intake Side |
| *g | Taper Squish | - | - |
A dual injector system is used. By locating a fuel injector assembly at each intake port leading to the intake valves, injection is optimized for enhanced fuel combustion.
| *1 | Fuel Injector Assembly | - | - |
| *a | Intake Port | *b | Tumble Flow |