CONSTRUCTION
The piston is made of aluminum alloy.
The piston head portion uses a taper squish shape for enhanced fuel combustion efficiency, as well as a configuration that optimizes tumble flow.
The piston skirt is coated with resin to reduce friction losses.
Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.
The No. 1 compression ring, with a thickness of 1.2 mm (0.0472 in.), is used to maintain rigidity to correspond with the higher in-cylinder pressure caused by the increase in the compression ratio.
The sliding surface of the No. 2 compression ring is chrome plated for improved wear resistance.
The oil ring is a 3-piece type, and use of the oil ring contributes higher reliability and lower friction.
The oil ring uses a 3-piece type for improved reliability and reduced tension, while a DLC coating on the sliding surface provides reduced friction and improved abrasion resistance.
| *1 | No. 1 Compression Ring | *2 | No. 2 Compression Ring |
| *3 | Oil Ring | - | - |
| *a | Taper Squish Shape | *b | Resin Coating |
| *c | DLC Coating | *d | Chrome Plating |
| *e | DLC Coating (Top and Bottom Asymmetry Barrel) | - | - |