CONSTRUCTION
Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the large total port areas.
The valves are directly opened and closed by 2 camshafts.
This engine uses a Dual Variable Valve Timing-intelligent (Dual VVT-i) system which controls the intake camshaft (camshaft) and exhaust camshaft (No. 2 camshaft) to provide optimal valve timing according to driving conditions. With this, lower fuel consumption, higher engine performance, and reduced exhaust emissions have been achieved.
| *1 | Timing Chain Tension Arm | *2 | No. 1 Chain Tensioner Assembly |
| *3 | Intake VVT-i Controller (Camshaft Timing Sprocket Assembly) | *4 | Timing Chain (Chain Sub-assembly) |
| *5 | Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly) | *6 | Intake Camshaft (Camshaft) |
| *7 | Exhaust Camshaft (No. 2 Camshaft) | *8 | Timing Chain Guide |