Home › Engine / Hybrid System › 1KR-FE (ENGINE MECHANICAL) › ENGINE UNIT › from 2020.07
NM36W0E _51 Engine / Hybrid System _091267 1KR-FE ENGINE MECHANICAL _0433012 ENGINE UNIT DE DETAILS F

1KR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  INTAKE AND EXHAUST VALVE AND VALVE LIFTER  


CONSTRUCTION


a.

Narrower valve stems are used to reduce the intake and exhaust resistance and to reduce weight.


b.

The same valve springs are used for both the intake and exhaust valves. They are variable pitch springs that offer good valve following performance.


c.

Valve lifters with shimless valve adjustment is used for weight reduction.


d.

Diamond Like Carbon (DLC) coating is applied to improve fuel efficiency, which is achieved due to reduced friction.


e.

The exhaust valves improve valve cooling performance and reliability by using sodium as a refrigerant. Holes are provided in the valve stems and sodium with high heat conductance and a low melting point is inserted to support high exhaust temperatures. Also, the valve stems are made hollow to achieve weight reduction and reduce friction.

W114957C03
2.24,0.635 2.365,0.417 2.365,0.417 2.521,0.417 true 4.708,1.167 4.51,0.781 4.51,0.781 4.323,0.781 true 2.333,1.479 2.458,1.26 2.458,1.26 2.604,1.26 true 2.146,3.177 2.271,2.958 2.271,2.958 2.427,2.958 true 2.563,0.323 2.813,0.563 0.25,0.24 10 false *1 2.635,1.156 2.885,1.396 0.25,0.24 10 false *2 2.479,2.875 2.729,3.115 0.25,0.24 10 false *3 5.813,1.167 6.063,1.406 0.25,0.24 10 false *a 4.146,0.698 4.396,0.938 0.25,0.24 10 false *b
*1 Cam *2 Valve Lifter
*3 Valve - -
*a Lifter Thickness *b Diamond Like Carbon (DLC) Coating


HINT:

The adjustment of the valve clearance is accomplished by selecting and replacing the appropriate valve lifters. Adjusting valve lifters are available in 29 increments of 0.02 mm (0.00079 in.), from 5.12 mm (0.201 in.) to 5.68 mm (0.223 in.).