Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › SFI SYSTEM › from 2020.07
NM36W0E _51 Engine / Hybrid System _091266 1KR-FE ENGINE CONTROL _0433013 SFI SYSTEM CO CONTROL F

1KR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


SYSTEM CONTROL


a.

Using the engine speed signal, vehicle speed signal, and the signals from E.F.I. vacuum sensor assembly, throttle position sensor and E.F.I. engine coolant temperature sensor, the ECM can calculate optimal valve timing for each driving condition and controls the camshaft timing oil control valve assemblies. In addition, the ECM uses signals from the camshaft position sensors and the crank position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.

W100539E07
0.25,1.344 1.677,1.958 1.427,0.615 10 false E.F.I. Vacuum Sensor Assembly 0.25,2.094 1.26,2.771 1.01,0.677 10 false Throttle Position Sensor 0.25,2.917 1.625,3.531 1.375,0.615 10 false E.F.I. Engine Coolant Temperature Sensor 0.25,3.729 2.042,4.01 1.792,0.281 10 false Crank Position Sensor 0.26,4.208 2.042,4.479 1.781,0.271 10 false Vehicle Speed Signal 3.385,0.917 4.813,1.26 1.427,0.344 10 false Target Valve Timing 3.396,3.146 4.781,3.438 1.385,0.292 10 false Correction 3.427,3.688 4.938,4.031 1.51,0.344 10 false Actual Valve Timing 4.333,1.677 5,2.021 0.667,0.344 10 false Feedback 5.083,1.24 5.781,1.938 0.698,0.698 10 false Duty-cycle Control 5.854,0.948 6.927,2.563 1.073,1.615 10 false Camshaft Timing Oil Control Valve Assembly 3.875,0.292 4.281,0.635 0.406,0.344 10 false ECM 0.25,0.51 1.438,1.156 1.188,0.646 10 false Camshaft Position Sensor



FUNCTION


a.

The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 41° and 45° respectively (of crankshaft angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all speed ranges as well as increasing fuel economy and reducing exhaust emissions.

W146469E01
0.26,0.229 2.354,0.448 2.094,0.219 10 false E.F.I. Vacuum Sensor Assembly 0.323,0.625 2.25,0.833 1.927,0.208 10 false Intake Air Temperature Sensor 0.25,1.188 1.698,1.375 1.448,0.188 10 false Crank Position Sensor 0.25,1.656 2.094,1.875 1.844,0.219 10 false Cam Position Sensor (Intake) 0.25,2.135 2.219,2.365 1.969,0.229 10 false Cam Position Sensor (Exhaust) 0.25,2.604 2.51,2.833 2.26,0.229 10 false Accelerator Pedal Sensor Assembly 0.25,3.083 1.771,3.281 1.521,0.198 10 false Throttle Position Sensor 0.26,3.563 2.896,3.76 2.635,0.198 10 false E.F.I. Engine Coolant Temperature Sensor 1.813,4.74 2.948,4.927 1.135,0.188 10 false Skid Control ECU 0.51,5.458 2.271,5.667 1.76,0.208 10 false : CAN communication line 4.479,2.219 4.885,2.417 0.406,0.198 10 false ECM 5.823,0.219 6.865,0.906 1.042,0.688 10 false Camshaft Timing Oil Control Valve Assembly (Intake) 5.813,2.802 6.854,3.51 1.042,0.708 10 false Camshaft Timing Oil Control Valve Assembly (Exhaust) 3.823,4.698 5.458,5.073 1.635,0.375 10 false Central Gateway ECU (Network Gateway ECU)

W139420C02
3.604,0.646 3.833,0.417 3.833,0.417 4,0.417 true 3.531,0.646 3.313,0.438 3.313,0.438 3.146,0.438 true 3.094,0.698 3.313,0.865 0.219,0.167 10 false *a 4.042,0.635 4.354,0.792 0.313,0.156 10 false *b 3.479,0.229 3.688,0.406 0.208,0.177 10 false *c 3.51,3.448 3.823,3.604 0.313,0.156 10 false *d 4.073,0.323 4.385,0.521 0.313,0.198 10 false 1° 2.906,0.344 3.188,0.542 0.281,0.198 10 false 1° 4.542,0.823 4.854,1.021 0.313,0.198 10 false 44° 2.521,0.75 2.802,0.948 0.281,0.198 10 false 40° 2.146,2.375 2.469,2.573 0.323,0.198 10 false 65° 2.625,2.656 2.844,2.823 0.219,0.167 10 false *a 4.167,2.854 4.479,3.01 0.313,0.156 10 false *b 2.896,3.115 3.219,3.313 0.323,0.198 10 false 24° 3.75,3.24 4.073,3.438 0.323,0.198 10 false 8° 4.667,2.615 5.031,2.802 0.365,0.188 10 false 53°
*a VVT-i Operation Range (Intake) *b VVT-i Operation Range (Exhaust)
*c TDC *d BDC
V100135

Exhaust Valve Opening Angle
V100136

Intake Valve Opening Angle



b.

The Dual VVT-i system delivers excellent benefit in vehicle states as shown in the table below.

During Idle
W109609E01
3.417,0.083 3.75,0.333 0.333,0.25 10 TDC 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 3.406,1.542 3.74,1.76 0.333,0.219 10 BDC 4.125,0.833 4.458,1.083 0.333,0.25 10 IN 3.875,0.302 4.958,0.552 1.083,0.25 10 Most Retarded

Objective Effect
Eliminating overlap to reduce blowback to the intake side.
·

Stabilized idle speed

·

Better fuel economy



At Light Load
W109000E02
3,0.031 4.25,0.365 1.25,0.333 10 To Retarded Side 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 4.146,0.833 4.479,1.083 0.333,0.25 10 IN

Objective Effect
Eliminating overlap to reduce blowback to the intake side. Ensures engine stability

At Medium Load
W109001E02
2.469,0.052 3.719,0.302 1.25,0.25 10 To Advanced Side 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 4.135,0.833 4.469,1.083 0.333,0.25 10 IN

Objective Effect
Increasing overlap to increase internal EGR to reduce pumping losses.
·

Better fuel economy

·

Improved emission control



In Low to Medium Speed Range with Heavy Load
W109002E02
3.49,1.479 4.823,1.729 1.333,0.25 10 To Advanced Side 4.146,0.75 4.396,1 0.25,0.25 10 IN 2.833,0.75 3.167,1 0.333,0.25 10 EX

Objective Effect
Advancing the intake valve close timing for volumetric efficiency improvement. Improved torque in low to medium speed range

In High Speed Range with Heavy Load
W137434E01
2.313,1.469 3.49,1.771 1.177,0.302 10 false To Retarded Side 2.802,0.771 3.208,1.031 0.406,0.26 10 false EX 4.135,0.771 4.542,1.031 0.406,0.26 10 false IN

Objective Effect
Retarding the intake valve close timing for volumetric efficiency improvement. Improved output

At Low Temperatures
W109004E02
2.813,0.76 3.146,1.01 0.333,0.25 10 EX 4.167,0.76 4.417,1.01 0.25,0.25 10 IN

Objective Effect
Eliminating overlap to reduce blowback to the intake side stabilizes the idle speed during fast idle.
·

Stabilized idle speed

·

Better fuel economy



Upon Starting the Engine/Upon Stopping the Engine
W109005E02
3.625,0.115 4.708,0.365 1.083,0.25 10 Most Retarded 4.146,0.76 4.396,1.01 0.25,0.25 10 IN 2.833,0.76 3.167,1.01 0.333,0.25 10 EX

Objective Effect
Eliminating overlap to minimize blowback to the intake side. Improved startability