Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › SFI SYSTEM › from 2020.07
NM36W0E _51 Engine / Hybrid System _091266 1KR-FE ENGINE CONTROL _0433013 SFI SYSTEM CO CONTROL F

1KR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  FUEL PUMP CONTROL  


FUNCTION


a.

In this system, the airbag deployment signal from the airbag sensor assembly is detected by the ECM, and it turns off the C/OPN relay. After the fuel cut control has been activated, turning the power source from off to on or selecting the ignition switch from off to ON mode cancels the fuel cut control, and the engine can be restarted.


b.

The fuel pump control is used to stop the fuel pump when the airbags deploy in a collision.


c.

In this system, when the airbag deployment signal from the airbag sensor assembly is detected by the ECM, the ECM turns off the C/OPN relay.


d.

After the fuel cut control has been activated, turning the ignition switch from off to ON cancels the fuel cut control, and the engine can be restarted.

W146474E01
0.552,2.365 1.333,3.021 0.781,0.656 10 false From Airbag Sensors 1.896,2.24 2.771,2.688 0.875,0.448 10 false Airbag Sensor Assembly 4.281,1.229 4.729,1.49 0.448,0.26 10 false ECM 5.896,1.74 7,2.042 1.104,0.302 10 false Fuel Pump Motor 5.938,0.823 6.823,1.104 0.885,0.281 10 false C/OPN Relay 3.479,2.26 5.417,2.688 1.938,0.427 10 false Central Gateway ECU (Network Gateway ECU) 0.531,3.396 2.24,3.667 1.708,0.271 10 false : CAN communication line