Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM › 2020.07–2021.04
NM36W0E _56 Audio / Visual / Telematics _091426 TELEMATICS _0433091 TELEMATICS SYSTEM CO CONTROL F

TELEMATICS  TELEMATICS SYSTEM  CONTROL  eCall SERVICE  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the eCall system have the following functions:

Component Function

*1: Models without stereo component amplifier assembly (with multimedia system)

*2: Models with stereo component amplifier assembly

Map Light Assembly Telephone Microphone Assembly Receives the user's voice through the microphone module.
Manual (SOS) Switch (Mayday Switch Assembly) When pressed, allows the driver to connect to and communicate with the PSAP as an emergency assistance button (SOS) service.
Manual (SOS) Switch Indicator Green
·

Turns on when the system is operating normally within the service area.

·

Blinks during a call and turns off when the system is malfunctioning.


Red
·

Illuminates to warn the user when a malfunction occurs in the system.

·

Turns off when the system is operating normally.


DCM (Telephone Transceiver Assembly)
·

Connects to the PSAP and allows the driver to speak with the call center operator when the automatic emergency call service or the manual emergency call service is active.

·

The cellular phone module makes or receives calls.

·

The DCM (telephone transceiver assembly) receives signals from the GNSS antenna, calculates the position of the vehicle and transmits it to the PSAP.

·

Controls the on/off and blinking actions of the manual (SOS) switch indicator.

·

Dims the manual (SOS) switch indicator when the taillight relay on signal is received.

·

When communicating with PSAP, sends the user's voice picked up by the telephone microphone assembly, and outputs the operator's voice through the front No. 3 speaker assembly.


Back-up Battery (Mobilephone Battery) Is built into the DCM (telephone transceiver assembly) and supplies power to the DCM (telephone transceiver assembly) when the automatic emergency call service is activated and the vehicle battery cannot supply power.
Roof Antenna Assembly Telephone Antenna Is for a cellular phone antenna which is compatible with the transmission and reception of frequency bands of cellular phones. It transmits signals from the DCM (telephone transceiver assembly) and receives signals from the call center.
GNSS Antenna Receives the signals from GNSS satellites and transmits these signals to the DCM (telephone transceiver assembly).
Airbag Sensor Assembly Sends an activation signal to the DCM (telephone transceiver assembly) when the airbags deploy. (An automatic emergency call service is made.)
Radio and Display Receiver Assembly*1 Receives the mute signal from the DCM (telephone transceiver assembly) to mute any audio sound.
Stereo Component Amplifier Assembly*2 Receives the mute signal from the DCM (telephone transceiver assembly) to mute any audio sound.
Front No. 3 Speaker Assembly Outputs the PSAP operator's voice.



FUNCTION


a.

Automatic Emergency Call Service

·

If any of the airbags are deployed due to a serious collision, the DCM (telephone transceiver assembly) receives the deployment signal from the airbag sensor assembly. After receiving the deployment signal, the DCM (telephone transceiver assembly) automatically makes an emergency call and transmits the vehicle location and user information to the PSAP closest to the vehicle.

·

The system is then automatically connected to a PSAP and the user can talk to a PSAP operator. The PSAP operator contacts the emergency services when the user is unable to answer.

Automatic Emergency Call Service Image
Y178729C01
1.719,1.448 2.031,1.646 0.313,0.198 10 false *a 3.75,1.323 4.063,1.521 0.313,0.198 10 false *b 5.615,1.198 5.927,1.396 0.313,0.198 10 false *c
*a Airbag Deployment or Collision Detection *b Public Safety Answering Point (PSAP)
*c Ambulance - -




b.

Manual Emergency Call Service

·

By pushing the manual (SOS) switch (mayday switch assembly) during an on-road emergency, the DCM (telephone transceiver assembly) transmits the vehicle location and user information, and calls to the PSAP closest to the vehicle.

·

The PSAP operator determines the level of the emergency based on the vehicle location and from the conversation with the user, and contacts the emergency services if necessary.

Manual Emergency Call Service Image
Y178730C01
1.948,1.365 2.26,1.563 0.313,0.198 10 false *1 4.906,1.354 5.219,1.552 0.313,0.198 10 false *a
*1 Manual (SOS) Switch (Mayday Switch Assembly) - -
*a Public Safety Answering Point (PSAP) - -




c.

eCall Mode

·

There are 4 modes depending on the vehicle status.

Mode Type Available Services
Shipping Mode
·

Automatic Emergency Call Service and Manual Emergency Call Service can be utilized.

·

In addition, certain data communication services can be utilized.


eCall Active Mode Automatic Emergency Call Service, Manual Emergency Call Service and all other services can be utilized.
eCall Only Mode*1 Only eCall functions can be utilized.
Dormant Mode*1 Only Automatic Emergency Call Service and Manual Emergency Call Service can be utilized.*2

HINT:

*1: For some destinations, only eCall Only Mode and Dormant Mode are available.

*2: The system will not connect to the telecommunication network except when Automatic Emergency Call Service or Manual Emergency Call Service are active.





DIAGNOSIS


a.

If there is a malfunction in the system, the DCM (telephone transceiver assembly) stores Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.