OUTLINE
A planetary type starter assembly is used.
An Inrush Current Reduction (ICR) relay, which is built into the planetary type starter assembly, is used. The ICR relay stabilizes the vehicle power source voltage during starter motor operation.*
*: Models with stop and start system
A starter control (cranking hold function) is used. Once the engine switch is pushed, this function operates the starter until the engine starts.*
*: Models with entry and start system
SPECIFICATION
|
*1: Length from the mounted area to the rear end of the starter *2: Viewed from pinion side |
|
| Starter Type | Planetary |
| Rating Output | 1.0 kW |
| Rating Voltage | 12 V |
| Length*1 | 127.4 mm (5.02 in.) |
| Weight | 2150 g (4.7 lb) |
| Rotational Direction*2 | Clockwise |
|
*1: Length from the mounted area to the rear end of the starter *2: Viewed from pinion side |
|
| Starter Type | Planetary (built-in ICR Relay) |
| Rating Output | 1.2 kW |
| Rating Voltage | 12 V |
| Length*1 | 127.4 mm (5.02 in.) |
| Weight | 2800 g (6.2 lb) |
| Rotational Direction*2 | Clockwise |