CONSTRUCTION
The exhaust pipes use 2 ball joints in order to achieve a simple construction and ensured reliability.
TWC is provided at the front of the front exhaust pipe assembly.
A 2-way exhaust control system is provided to reduce noise and vibration from the main muffler.
| *1 | Front Exhaust Pipe Assembly | *2 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Image | *b | Ball Joint Portion |
| *c | TWC | *d | Sub Muffler |
| *e | Main Muffler | - | - |
| *1 | Front Exhaust Pipe Assembly | *2 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Image | *b | Ball Joint Portion |
| *c | TWC | *d | Sub Muffler |
| *e | Main Muffler | - | - |
| *1 | Front Exhaust Pipe Assembly | *2 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Image | *b | Ball Joint Portion |
| *c | GPF | *d | Sub Muffler |
| *e | Main Muffler | - | - |
OPERATION
In the 2-way exhaust system, a variable valve that adjusts the area of the exhaust gas passage according to the exhaust gas pressure is provided inside the main muffler. The variable valve is closed during idling and low engine speeds by the return spring.
| Variable valve (Closed) | When the variable valve is closed, it functions as a muffler that prioritizes the mute function. |
| Variable valve (Open) | When the pressure of the exhaust gas inside the main muffler increases as the engine speed rises, it functions as a low back pressure type of muffler by opening the variable valve to enlarge the passage. |
| *1 | Variable valve | - | - |
| *a | Variable valve (Closed) | *b | Variable valve (Open) |
| *1 | Variable valve | - | - |
| *a | Variable valve (Closed) | *b | Variable valve (Open) |